Brake System Warning Light- Page 156

2012 Mazda Mazda6 Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

6. Interior Comfort
9. Customer Information and Reporting Safety Defects
background image

q

Brake System Warning Light

This warning has the following functions:

Parking brake warning

The light illuminates when the parking
brake is applied with the ignition switched
to START or ON. It turns off when the
parking brake is fully released.

Low brake fluid level warning

If the light stays on after the parking brake
is fully released, you may have a brake
problem.

Brake system warning (2.5-liter
engine)

í

Illuminates when there is a malfunction in
the brake switch.

Drive to the side of the road and park off
the right-of-way.

You may notice that the pedal is harder to
depress or that it may go closer to the
floor. In either case, it will take longer to
stop the vehicle.

1. With the engine stopped, open the

hood and check the brake fluid level
immediately, and then add fluid if
required (page 8-24).

2. After adding fluid, check the light

again.

If the warning light remains on, or if the
brakes do not operate properly, do not
drive the vehicle. Have it towed to an
Authorized Mazda Dealer.

Even if the light turns off, have your
brake system inspected as soon as
possible by an Authorized Mazda Dealer.

NOTE

Having to add brake fluid is sometimes an
indicator of leakage. Consult an Authorized
Mazda Dealer as soon as possible even if the
brake light is no longer illuminated.

WARNING

Do not drive with the brake system
warning light illuminated. Contact an
Authorized Mazda Dealer to have the
brakes inspected as soon as possible:

Driving with the brake system
warning light illuminated is
dangerous. It indicates that your
brakes may not work at all or that
they could completely fail at any
time. If this light remains
illuminated, after checking that the
parking brake is fully released, have
the brakes inspected immediately.

q

Anti-Lock Brake System (ABS)

The ABS control unit continuously
monitors the speed of each wheel. If one
wheel is about to lock up, the ABS
responds by automatically releasing and
reapplying that wheel's brake.

The driver will feel a slight vibration in
the brake pedal and may hear a chattering
noise from the brake system. This is
normal ABS system operation. Continue
to depress the brake pedal without
pumping the brakes.

5-8

Driving Your Mazda

í

Some models.

Starting and Driving

Mazda6_8CD1-EA-11C_Edition2 Page156
Tuesday, September 13 2011 5:7 PM

Form No.8CD1-EA-11C

Detailed Information for 2012 Mazda Mazda6 Owners Manual

Lists of information found in 2012 Mazda Mazda6 Owners Manual - Page 156

  • 2.5-liter engine) í Illuminates when there is a malfunction in the brake switch.
  • 1. With the engine stopped, open the hood and check the brake fluid level immediately, and then add fluid if required (page 8-24).
  • 2. After adding fluid, check the light again.

Related Documents for 2012 Mazda Mazda6 Owners Manual