Jam-safe Window; Before Driving; Power window system initialization- Page 115

2019 Mazda Mazda6 __owners_manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

When Driving
Customer Information and Reporting Safety Defects
background image

Auto-opening/Closing

To fully open the window automatically,
press the switch completely down, then
release. The window will fully open
automatically.
To fully close the window automatically,
pull the switch completely up, then
release. The window will fully close
automatically.
 
To stop the window partway, pull or press
the switch in the opposite direction and
then release it.

NOTE

Power window system initialization
procedure

If the battery was disconnected during
vehicle maintenance, or for other reasons
(such as a switch continues to be operated
after the window is fully open/closed), the
window will not fully open and close
automatically.
The power window auto function will only
resume on a power window that has been
reset.
1. Switch the ignition ON.
2. Make sure that the power window lock

switch located on the driver's door is
not depressed.

3. Press the switch and fully open the

window.

4. Pull up the switch to fully close the

window and continue holding the
switch for about 2 seconds after the
window fully closed.

5. Make sure that the power windows

operate correctly using the door
switches.

After the system has been re-initialized,
each passenger window can be fully
opened or closed automatically using the
master control switches.

Jam-safe Window

If foreign matter is detected between the
window and the window frame while the
window is closing automatically (refer to
Auto-opening/Closing on page 3-31), the
window stops closing and automatically
opens partway.

NOTE

The jam-safe function may operate
under the following conditions:

A strong impact is detected while the
window is closing automatically.

Window is closing automatically in
very low temperatures.

In the event the jam-safe function
activates and the power window cannot
be closed automatically, pull and hold
the switch and the window will close.

The jam-safe window function does not
operate until the system has been reset.

Before Driving

Windows

3-31

Mazda6_8HK6-EA-19A_Edition1

2018-11-15 9:36:06

Detailed Information for 2019 Mazda Mazda6 __owners_manual

Lists of information found in 2019 Mazda Mazda6 __owners_manual - Page 115

  • 1. Switch the ignition ON.
  • 2. Make sure that the power window lock switch located on the driver's door is not depressed.
  • 3. Press the switch and fully open the window.
  • 4. Pull up the switch to fully close the window and continue holding the switch for about 2 seconds after the window fully closed.
  • 5. Make sure that the power windows operate correctly using the door switches.

Related Documents for 2019 Mazda Mazda6 __owners_manual