Function and how it can be changed (underlined item is initial setting)
Three-flash turn signal (page 4-79)
Operational/non-operational
On/Off
Ambient lights (page 4-79)
Ambient lights brightness
*6
Bright/Medium/Dim/Off
*
1 If the auto-wiper control is set to Off, the wiper lever
position is set to intermittent operation.
*
2 If the setting is changed to Off, the following operation is performed according to the headlight switch
position:
At
position: Headlights turn off immediately after the ignition is switched off.
At any position other than
: Headlights on/off conditions vary according to the headlight switch
position. Refer to Headlights on page 4-74.
*
3 When set to Off, the lights-on reminder is operable.
*
4 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda
recommends that these systems remain On.
*
5 The lights-on reminder settings can be changed at anytime, however, the lights-on reminder only operates
when the auto headlight function is set to Off. Refer to Lights-On Reminder on page 7-42.
*
6 Change the ambient light illumination level with the parking lights or headlights turned on.
▼
Other Equipment/Functions
You can change the function settings according to your preference.
Personalization features which can be changed differ depending on the vehicle
specification.
Personalization features which can be changed may change without notice depending on
software updates.
The following personalization features can be set or changed by the customer or an
Authorized Mazda Dealer. Consult an Authorized Mazda Dealer for details.
Personalization features which can be changed differ depending on the specification.
Door locks
Method for changing the auto lock/unlock functions using the door-lock switch
NOTE
Function number 3 in the following table is the factory setting for your vehicle.
Specifications
Personalization Features
9-14
Mazda6_8HK6-EA-19A_Edition1
2018-11-15 9:36:06