When Driving- Page 146

NOTE



After starting the engine, the push
button start indicator light (amber)
turns off and the ignition switches to
the ON position.



(SKYACTIV-G 2.5, SKYACTIV-G
2.5T)

After pressing the push button start
and before the engine starts, the
operation sound of the fuel pump
motor from near the fuel tank can be
heard, however, this does not
indicate a malfunction.



(SKYACTIV-D 2.2)



The starter does not rotate until
the glow indicator light turns off.



If the ignition is left switched ON
for a long period of time without
the engine running after the glow
plugs are warmed up, the glow
plugs may warm up again which
will illuminate the glow indicator
light.



When starting the engine, do not
release the brake pedal until the
glow indicator light in the
instrument cluster turns off and
the engine starts, after pressing
the push button start.



If the brake pedal is released
before the engine starts, depress
the brake pedal again and press
the push button start to start the
engine.

8. After starting the engine, let it idle for

about 10 seconds.

NOTE



Do not use high engine speeds until
reaching the operating temperature.



(SKYACTIV-G 2.5, SKYACTIV-G
2.5T)



Whether the engine is cold or
warm, it should be started without
the use of the accelerator.



If the engine does not start the first
time, refer to Starting a Flooded
Engine under Emergency Starting.
If the engine still does not start,
have your vehicle inspected by an
Authorized Mazda Dealer (page
7-18).



(SKYACTIV-D 2.2)

If the ambient temperature is lower
than about 

－

 10 °C (14 °F), the

maximum engine speed may not be
attained for about 3 minutes after
the engine starts to protect the
engine.

When Driving

Start/Stop Engine

4-8

Mazda6_8JN3-EA-20H_Edition1_old

2020-6-18 17:31:27