Obstruction Detection Indication; Detection Indicator; When Driving- Page 391

▼

Obstruction Detection Indication

The position of a sensor which has detected an obstruction is indicated. The gauge
illuminates in different areas depending on the distance to an obstruction detected by the
sensor.
As the vehicle approaches closer to an obstruction, the zone in the gauge closer to the
vehicle illuminates.
 

Rear ultrasonic sensor

Left front corner 
ultrasonic sensor

Left rear corner 
ultrasonic sensor

Right front corner 
ultrasonic sensor

Right rear corner 
ultrasonic sensor

Front ultrasonic sensor

NOTE

The detection indicator can switch between display and non-display.
Refer to the Settings section in the Mazda Connect Owner's Manual.
When the detection indicator is set to “Display”, even with the 360° view monitor not
displayed, if a front ultrasonic sensor or a front corner ultrasonic sensor detects an
obstruction, the 360° view monitor switches automatically to display. When an obstruction
is no longer detected, the display switches to the display before the obstruction was
detected. However, while the 360° view monitor is displayed, it continues to display no
matter if an obstruction is detected or not.

System problem notification

If a problem occurs, the driver is notified of the problem by the following indications.

Detection Indicator

Solution

Disconnection

The system may have a malfunction. Have the
vehicle inspected at an Authorized Mazda Deal‐
er as soon as possible.

When Driving

Parking Sensor System

4-253

Mazda6_8JN3-EA-20H_Edition1_old

2020-6-18 17:31:27