Replacing Exterior Light Bulbs; Owner Maintenance; Maintenance and Care- Page 483

CAUTION

When removing the lens or lamp unit using
a flathead screwdriver, make sure that the
flathead screwdriver does not contact the
interior terminal. If the flathead screwdriver
contacts the terminal, a short circuit may
occur.

NOTE



To replace the bulb, contact an
Authorized Mazda Dealer.



Use the protective cover and carton for
the replacement bulb to dispose of the
old bulb promptly and out of the reach
of children.

▼

Replacing Exterior Light Bulbs

The exterior lights have either LEDs or
normal bulbs.
Only the bulb for a parking light can be
replaced.

LED type



Headlights



Daytime running lights



Parking lights

*



Front turn signal lights



Front side-marker lights



Side turn signal lights



High-mount brake light



Rear turn signal lights



Rear side-marker lights



Brake lights



Taillights



Reverse lights



License plate lights

The LED bulb cannot be replaced as a
single unit because it is an integrated unit.

The LED bulb has to be replaced with the
unit. We recommend an Authorized
Mazda Dealer when the replacement is
necessary.

Bulb type

Parking lights

*

Double-filament light bulb, however, only
5 W filament bulb is used in the parking
lights.
1. Make sure the ignition is switched off,

and the headlight switch is off.

2. If you are changing the right bulb, start

the engine, turn the steering wheel all
the way to the left, and turn off engine.
If you are changing the left bulb, turn
the steering wheel to the right.

3. Pull the center of each plastic retainer

and remove the retainers.

Removal

Installation

Maintenance and Care

Owner Maintenance

*Some models.

6-49

Mazda6_8JN3-EA-20H_Edition1_old

2020-6-18 17:31:27