Recline Switch; Lumbar Adjustment ; Note: - Page 2

2009 Mazda MAZDASPEED3 Mazda3 Smart Start Guide

Model Year
2014 Dodge Charger SRT Owner Manual
background image

1

2

Slide/Tilt Switch

Recline Switch

MANUAL SEAT CONTROLS

•   To move a front seat forward or 

backward, raise the lever located  
on the bottom front of the seat  
and slide the seat in the  
desired direction.  

•   To change the seatback angle, 

lean forward slightly while raising 
the lever. Then, lean back to the 
desired position and release  
the lever. 

•   To adjust the driver’s seat height,  

move the control lever up or down  
as needed.

  

Lumbar Adjustment 

•   Move the lever forward to adjust the lumbar support as required.  

Note: 

There are three levels of lumbar support and depending on the last setting,  

you may have to cycle through the levels in order to increase or decrease support.

ELECTRONICALLY OPERATED DRIVER’S SEAT

Slide/Tilt Switch  

•   To slide the seat, move the slide lifter switch on the outside of the seat to 

the front or back and hold it. Release the switch at the desired position. 
The seat height can be adjusted by moving the switch up or down.

Recline Switch

•    Change the seatback angle by pressing the front or rear side of the 

reclining switch. Release the switch at the desired position. 

  

Lumbar  

Adjustment

  

Raise/Lower  

Seat

Seatback 

Angle

KEYLESS ENTRY

This system remotely locks and unlocks the  
doors and the liftgate with a remote transmitter. 
Press the buttons slowly and carefully.

  •   To lock the door and the liftgate, press the 

LOCK button and the hazard warning lights 
will flash once.

 
  •   To confirm that all doors and the liftgate have 

been locked, press the LOCK button again 
within 5 seconds. If they are closed and 
locked, the horn will sound.

 
  •     To unlock the driver’s door, press the 

UNLOCK button and the hazard warning 
lights will flash twice.

  •   To unlock all doors and the liftgate, press the 

UNLOCK button again within 5 seconds.

  •   Press and hold the trunk release button until 

the trunk opens.

 
  •     Press the panic button for 1 second or more 

to activate the vehicle’s alarm. The horn will 
sound intermittently and the warning lights 
will flash for 2-1/2 minutes or until any button 
is pressed on the transmitter. 

Panic Alarm

Lock

Unlock

Trunk

Key

Seats

162132_09a_Mazda3_SSG_072908.indd   2-3

7/29/08   11:13:36 AM

Detailed Information for 2009 Mazda MAZDASPEED3 Mazda3 Smart Start Guide

Lists of information found in 2009 Mazda MAZDASPEED3 Mazda3 Smart Start Guide - Page 2

  • To move a front seat forward or backward, raise the lever located on the bottom front of the seat and slide the seat in the desired direction.
  • To change the seatback angle, lean forward slightly while raising the lever.
  • To adjust the driver’s seat height, move the control lever up or down as needed.
  • Move the lever forward to adjust the lumbar support as required.
  • To slide the seat, move the slide lifter switch on the outside of the seat to the front or back and hold it.
  • Change the seatback angle by pressing the front or rear side of the reclining switch.
  • To lock the door and the liftgate, press the LOCK button and the hazard warning lights will flash once.
  • To confirm that all doors and the liftgate have been locked, press the LOCK button again within 5 seconds.
  • To unlock the driver’s door, press the UNLOCK button and the hazard warning lights will flash twice.
  • To unlock all doors and the liftgate, press the UNLOCK button again within 5 seconds.
  • Press and hold the trunk release button until the trunk opens.
  • Press the panic button for 1 second or more to activate the vehicle’s alarm.