Power Steering Malfunction Indicator Light- Page 203

2011 Mazda MAZDASPEED3 Mazda Speed 3 Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

9. Customer Information
background image

Black plate (203,1)

Signal

Warning/Indicator Lights

Page

Lights-On Indicator Light

5-56

Power Steering Malfunction Indicator Light

5-56

Turn Signal/Hazard Warning Indicator Lights

5-56

q

Brake System Warning Light

This warning has the following functions:

Brake system warning

í

Illuminates when there is a malfunction in
the brake switch.

Parking brake warning

The light illuminates when the parking
brake is applied with the ignition switched
to START or ON. It turns off when the
parking brake is fully released.

Low brake fluid level warning

If the light stays on after the parking brake
is fully released, you may have a brake
problem.

Drive to the side of the road and park off
the right-of-way.

You may notice that the pedal is harder to
depress or that it may go closer to the
floor. In either case, it will take longer to
stop the vehicle.

1. With the engine stopped, open the

hood and check the brake fluid level
immediately, and then add fluid if
required (page 8-23).

2. After adding fluid, check the light

again.

If the warning light remains on, or if the
brakes do not operate properly, do not
drive the vehicle. Have it towed to an
Authorized Mazda Dealer.

Even if the light turns off have your brake
system inspected as soon as possible by
an Authorized Mazda Dealer.

NOTE

Having to add brake fluid is sometimes an
indicator of leakage. Consult an Authorized
Mazda Dealer as soon as possible even if the
brake light is no longer illuminated.

Driving Your Mazda

Warning/Indicator Lights and Beep Sounds

5-43

í

Some models.

Mazda3_8BM5-EA-10F_Edition2 Page203
Monday, July 26 2010 1:53 PM

Form No.8BM5-EA-10F

Detailed Information for 2011 Mazda MAZDASPEED3 Mazda Speed 3 Owners Manual

Lists of information found in 2011 Mazda MAZDASPEED3 Mazda Speed 3 Owners Manual - Page 203

  • 1. With the engine stopped, open the hood and check the brake fluid level immediately, and then add fluid if required (page 8-23).
  • 2. After adding fluid, check the light again.