Replacing Exterior Light Bulbs- Page 415

2012 Mazda MAZDASPEED3 Mazda Speed 3 Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

9. Customer Information
background image

Black plate (415,1)

WARNING

Do not replace the xenon fusion bulbs
yourself:

Replacing the xenon fusion bulbs
yourself is dangerous. Because the
xenon fusion bulbs require high
voltage, you could receive an electric
shock if the bulbs are handled
incorrectly. Consult an Authorized
Mazda Dealer when the replacement
is necessary.

Never touch the glass portion of a
halogen bulb with your bare hands and
always wear eye protection when
handling or working around the bulbs:

When a halogen bulb breaks, it is
dangerous. These bulbs contain
pressurized gas. If one is broken, it
will explode and serious injuries
could be caused by the flying glass.
If the glass portion is touched with
bare hands, body oil could cause the
bulb to overheat and explode when
lit.

Always keep halogen bulbs out of the
reach of children:

Playing with a halogen bulb is
dangerous. Serious injuries could be
caused by dropping a halogen bulb
or breaking it some other way.

q

Replacing Exterior Light Bulbs

NOTE

l

To replace the bulb, contact an Authorized
Mazda Dealer.

l

If the halogen bulb is accidentally touched,
it should be cleaned with rubbing alcohol
before being used.

l

Use the protective cover and carton for the
replacement bulb to dispose of the old bulb
promptly and out of the reach of children.

Xenon fusion bulb/Adaptive front
lighting system

Replacing the headlight bulbs

(Low/High beam bulbs)

You cannot replace the low/high beam
bulbs by yourself. The bulbs must be
replaced at an expert repairer, we
recommend an Authorized Mazda Dealer.

Parking lights (Except Canada)

1. Make sure the ignition is switched off,

and the headlight switch is off.

2. Turn the socket and bulb assembly

counterclockwise and remove it.

3. Disconnect the bulb from the socket.

4. Install the new bulb in the reverse order

of the removal procedure.

Daytime running lights (Canada)

1. Make sure the ignition is switched off,

and the headlight switch is off.

Maintenance and Care

Owner Maintenance

8-43

Mazda3_8BM5-EA-10F_Edition2 Page415
Monday, July 26 2010 1:54 PM

Form No.8BM5-EA-10F

Detailed Information for 2012 Mazda MAZDASPEED3 Mazda Speed 3 Owners Manual

Lists of information found in 2012 Mazda MAZDASPEED3 Mazda Speed 3 Owners Manual - Page 415

  • 1. Make sure the ignition is switched off, and the headlight switch is off.
  • 2. Turn the socket and bulb assembly counterclockwise and remove it.
  • 3. Disconnect the bulb from the socket.
  • 4. Install the new bulb in the reverse order of the removal procedure.
  • 1. Make sure the ignition is switched off, and the headlight switch is off.