Driving Your Mazda; System Warning Light; Immobilizer System Warning - Page 103

5-27

Driving Your Mazda

Warning/Indicator Lights and Beeps

Form No. 8Q42-EA-01F

▼

Air Bag/Seat Belt Pretensioner 
System Warning Light

If the air bag/seat belt pretensioner system 
is OK, the warning light comes on when 
the ignition switch is turned to the ON 
position or after the engine is cranked. 
After about 6 seconds it goes out.

A system malfunction is indicated when 
the warning light constantly flashes, stays 
on or doesn’t come on at all. If any of 
these occur, consult an Authorized Mazda 
Dealer as soon as possible. The system 
may not work in an accident.

▼

Immobilizer System Warning 
Light

If the immobilizer system is working 
properly, the light will come on when the 
ignition switch is turned to the ON or 
START position. The light will go out 
when confirmation by the immobilizer 
system is completed.

If the light flashes rapidly, fails to come 
on, or comes on and stays on, it indicates 
a system malfunction. If any of these 
occur, contact an Authorized Mazda 
Dealer as soon as possible.

▼

Headlight High-Beam Indicator 
Light

This light indicates one of two things:

•

The high-beam headlights are on.

•

The turn signal lever is in the flash-to-
pass position.

NOTE

When the engine is jump-started to 
charge the battery, uneven rpm occurs 
and the ABS warning light comes on. 
This is due to a weak battery, not a 
malfunction.
Recharge the battery.

Self-Servicing the Air Bag/
Pretensioner Systems:
Self-servicing or tampering with the 
systems is dangerous. An air bag/
pretensioner could accidentally 
activate or become disabled. This 
could cause serious injuries. Never 
tamper with the systems and always 
have an Authorized Mazda Dealer 
perform all servicing and repairs.

WARNING

J07L(02MY).book  Page 27  Monday, June 11, 2001  4:52 PM