Before Driving Your Mazda; Driving Tips; Tire Chains- Page 79

4-9

Before Driving Your Mazda

Driving Tips

Form No. 8R09-EA-02G

▼

Tire Chains

Check local regulations before using tire 
chains.
Install the chains on the rear tires.
Don’t use chains on the front tires.
Use only SAE Class "S" chains, and make 
sure they fit.

Installing the chains

1. Remove the wheel covers, or the chain 

bands will scratch them.

2. Secure the chains on the rear tires as 

tightly as possible. Always follow the 
chain manufacturer’s instructions.

3. Retighten the chains after driving 

1/2—1 km (1/4—1/2 mile).

•

Chains may scratch or chip 
aluminum wheels. Install tire chains 
on steel wheels only.

•

Chains may affect handling.

•

Don’t go faster than 50 km/h (30 
mph) or the chain manufacturer’s 
recommended limit, whichever is 
lower.

•

Drive carefully and avoid bumps, 
holes, and sharp turns.

•

Avoid locked-wheel braking.

•

Don’t use chains on the temporary 
tire; it may result in damage to the 
vehicle and to the tire.

•

Don’t use chains on roads that are 
free of snow or ice. The tires and 
chains could be damaged.

CAUTION

Driving In Flooded Area

Driving with Wet Brakes:
Driving with wet brakes is dangerous. 
Increased stopping distance or the 
vehicle pulling to one side when 
braking could result in a serious 
accident. Light braking will indicate 
whether the brakes have been 
affected. Dry the brakes by driving 
very slowly and applying the brakes 
lightly until brake performance 
returns to normal.

Make sure water does not enter the 
vehicle interior or the engine area. The 
vehicle interior could become wet or 
the engine could be damaged.

WARNING

CAUTION

J07R_8R09_EA_02G_Edition4.book  Page 9  Monday, February 3, 2003  1:16 PM