Installing a Child-Restraint System- Page 32

2007 Mazda MX- 5 Miata Mx 5 Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

9. Customer Information and Reporting Safety Defects
background image

Black plate (32,1)

Installing a Child-
Restraint System

The passenger lap/shoulder belt can easily
be converted into the automatic locking
mode, which must be done to hold the
child-restraint system.
Some child-restraint systems also employ
specially designed LATCH attachments;
refer to

LATCH Child-Restraint

Systems

(page 2-23).

Follow these manufacturer's instructions
when installing a child-restraint system on
the passenger's seat, unless you are
attaching a LATCH-equipped child-
restraint system to the LATCH lower
anchors. Refer to

LATCH Child-

Restraint Systems

(page 2-23).

NOTE

Follow the child-restraint system
manufacturer's instructions carefully. If
you are not sure whether you have a
LATCH system, check in the child-
restraint system manufacturer's
instructions and follow them
accordingly. Depending on the type of
child-restraint system, it may not
employ seat belts which are in
automatic locking mode, however if it
uses an upper tether, it may not be
mounted properly in this vehicle as
there is no safe way to anchor the tether.
Confirm whether the child-restraint
system can be used with seat belts by
reading the child-restraint system
manufacturer's instructions.

Before installing a child-restraint system,
make sure the passenger air bag
deactivation indicator light illuminated by
using the key to turn the passenger air bag
off.
Refer to Passenger seat weight sensors on
page 2-37.
Refer to Passenger Air Bag Deactivation
Switch on page 2-30.

1. Make sure to remove articles from

behind the passenger seat that would
prevent the seat from sliding back fully,
and then slide the seat as far back as
possible.

2. Secure the child-restraint system with

the lap portion of the lap/shoulder belt.
See the instructions on the child-
restraint system for belt routing
instructions.

3. To get the retractor into the automatic

locking mode, pull the shoulder belt
portion of the seat belt until the entire
length of the belt is out of the retractor.

2-20

Essential Safety Equipment

Child Restraint

MX-5_8V80-EA-06F_Edition3 Page32
Tuesday, August 29 2006 10:22 AM

Form No.8V80-EA-06F

Detailed Information for 2007 Mazda MX- 5 Miata Mx 5 Owners Manual

Lists of information found in 2007 Mazda MX- 5 Miata Mx 5 Owners Manual - Page 32

  • 37. Refer to Passenger Air Bag Deactivation Switch on page 2-30.
  • 1. Make sure to remove articles from behind the passenger seat that would prevent the seat from sliding back fully, and then slide the seat as far back as possible.
  • 2. Secure the child-restraint system with the lap portion of the lap/shoulder belt.
  • 3. To get the retractor into the automatic locking mode, pull the shoulder belt portion of the seat belt until the entire length of the belt is out of the retractor.

Related Documents for 2007 Mazda MX- 5 Miata Mx 5 Owners Manual