Knowing Your Mazda- Page 110

2014 Mazda MX- 5 Miata Mx 5 Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

9. Customer Information and Reporting Safety Defects
background image

Black plate (110,1)

NOTE

l

The gear units on both sides have to be
unlocked to release the deck before it is
raised manually. Because the deck is heavy,
two adults are required to raise it.

l

The following describes the procedure for
the gear unit on one side. Perform the
procedure on both sides.

2. Insert the Allen wrench into the Allen

socket in the bolt head that is pointed
forward of the gear unit located under
the deck lid as shown in the figure.

Deck

Bolt

Gear unit

Allen wrench

NOTE

The gear units are located underneath the
deck.

Bolt

3. Use the eyebolt to get enough torque

on the short leg of the Allen wrench
and turn the Allen wrench 4 times
counterclockwise.

Allen wrench

Eyebolt

4. Disconnect the eyebolt from the Allen

wrench leaving the Allen wrench in
place, and insert the threaded end of
the eyebolt in the hole directly above
the Allen socket and tighten it
clockwise two full turns.

Eyebolt

Bolt

Thread hole

NOTE

Tighten the eyebolt with the Allen wrench
inserted. The Allen wrench can serve as a
reference for inserting the eyebolt more easily.

5. Remove the bolt, which is loosened

using the Allen wrench, by turning it
counterclockwise.

3-56

Knowing Your Mazda

Doors and Locks

MX-5_8DG6-EA-13F_Edition3 Page110
Monday, December 16 2013 2:10 PM

Form No.8DG6-EA-13F

Detailed Information for 2014 Mazda MX- 5 Miata Mx 5 Owners Manual

Lists of information found in 2014 Mazda MX- 5 Miata Mx 5 Owners Manual - Page 110

  • 2. Insert the Allen wrench into the Allen socket in the bolt head that is pointed forward of the gear unit located under the deck lid as shown in the figure.
  • 3. Use the eyebolt to get enough torque on the short leg of the Allen wrench and turn the Allen wrench 4 times counterclockwise.
  • 4. Disconnect the eyebolt from the Allen wrench leaving the Allen wrench in place, and insert the threaded end of the eyebolt in the hole directly above the Allen socket and tighten it clockwise two full turns.
  • 5. Remove the bolt, which is loosened using the Allen wrench, by turning it counterclockwise.

Related Documents for 2014 Mazda MX- 5 Miata Mx 5 Owners Manual