Before Driving; Doors and Locks- Page 67

3–13

Before Driving

Doors and Locks

NOTE



  The system can be set to unlock 

both doors and the fuel-filler lid by 

performing a single operation.

  Refer to Personalization Features on 

page 9-9.

  Use the following procedure to change 

the setting.

1.  Switch the ignition off and close 

both of the doors and the trunk lid.

2.  Open the driver's door.

3.  Within 30 seconds of opening the 

driver's door, press and hold the 

UNLOCK button on the key for 5 

seconds or longer (the sound of 

the doors locking/unlocking can be 

heard).

  After this, the system switches the 

setting of pressing the driver's 

request switch once or twice 

to unlock both doors each time 

the UNLOCK button is pressed 

(the sound of the doors locking/

unlocking can be heard).

4.  The setting change is completed by 

doing any one of the following:



  Switching the ignition to ACC or 

ON.



  Closing the driver's door.



  Opening the trunk lid.



  Not operating the key for 10 

seconds.



  Pressing any button except the 

UNLOCK button on the key.



  Pressing a request switch.



  Confirm that both doors and the fuel-

filler lid are securely locked.



  Both doors and the fuel-filler lid cannot 

be locked when any door is open.



  It may require a few seconds for the 

doors to unlock after the request switch 

is pressed.



  A beep sound is heard for confirmation 

when the doors and the fuel-filler lid 

are locked/unlocked using the request 

switch. If you prefer, the beep sound can 

be turned off.

  The volume of the beep sound can also 

be changed. Refer to Personalization 

Features on page 9-9.

  Use the following procedure to change 

the setting.

1.  Switch the ignition off and close 

both of the doors and the trunk lid.

2.  Open the driver's door.

3.  Within 30 seconds of opening the 

driver's door, press and hold the 

LOCK button on the key for 5 

seconds or longer.

  Both of the doors and the fuel-

filler lid lock and the beep sound 

activates at the currently set volume. 

The setting changes each time the 

LOCK button on the key is pressed 

and the beep sound activates at the 

set volume. (If the beep sound has 

been set to not activate, it will not 

activate.)

4.  The setting change is completed by 

doing any one of the following:



  Switching the ignition to ACC or 

ON.



  Closing the driver's door.



  Opening the trunk lid.



  Not operating the key for 10 

seconds.



  Pressing any button except the 

LOCK button on the key.



  Pressing a request switch.

MX-5_8EU4-EA-15D_Edition4.indb   13

2016/01/20   11:04:41