When Driving; When the System Operates- Page 203

▼

When the System Operates

1. The system goes on operation standby

when the LDWS OFF switch is
pressed and the LDWS OFF indicator
light in the instrument cluster turns off.

2. Drive the vehicle in the center of the

driving lane while the LDWS OFF
indicator light is turned off. The
system becomes operational when all
of the following conditions are met.



The vehicle is driven in the center of
the driving lane with the white or
yellow lines on the left and right
sides, or on either side.



The vehicle speed is about 70 km/h
(44 mph) or faster.



The vehicle is driven on a straight
road or road with gentle curves.

The LDWS does not operate in the
following cases:



The system cannot detect white or
yellow lines.



The vehicle speed is less than about
65 km/h (40 mph).



The vehicle is making a sharp turn.



The vehicle is making a curve at an
inadequate speed.

NOTE



The LDWS does not operate until the
system detects a white or yellow line on
either the left or right.



When the system detects a white or
yellow line on one side only, the system
will activate the warning only when the
vehicle deviates on the side where the
white or yellow line is being detected.



The distance and warning sensitivity
(likelihood of a warning) which the
system uses to determine the possibility
of a lane departure can be changed.
Refer to Personalization Features on
page 9-9.

When Driving

i-ACTIVSENSE

4-83

MX-5_8GV5-EA-18E_Edition3

2018-7-17 15:48:16