Owner Maintenance; Rear side-marker lights; Maintenance and Care- Page 392

9. After the hook is detached, pull out the

rear combination lamp unit in the
direction of the arrow and remove it.
 

Grommet installation hole

Clip

Hook

Rear combination 
lamp unit

CAUTION

Carefully pull out the rear combination
lamp unit when removing it from the
body.
The wiring may become damaged if the
rear combination lamp unit is forcefully
pulled out.

10. Turn the socket and bulb assembly

counterclockwise and remove it.

11. Disconnect the bulb from the socket.

12. Install the new bulb in the reverse

order of the removal procedure.

Rear side-marker lights

1. Make sure the ignition is switched off,

and the headlight switch is off.

2. Turn the socket and bulb assembly

counterclockwise and remove it.

3. Disconnect the bulb from the socket.

4. Install the new bulb in the reverse

order of the removal procedure.

Maintenance and Care

Owner Maintenance

6-46

MX-5_8GV5-EA-18E_Edition3

2018-7-17 15:48:16