If Trouble Arises; When the Roof Cannot be Closed- Page 475

NOTE

If it is difficult to see the bolt, remove
the windblocker and identify the bolt
from the center of the vehicle.

Windblocker

3. Turn the L-shaped hexagonal wrench

(Large) counterclockwise to loosen the
bolt slightly.

4. Remove the L-shaped hexagonal

wrench (Large) once from the bolt,
then insert the long end of the wrench
into the bolt.

NOTE

The tip of the long end of the L-shaped
hexagonal wrench can be used at an
angle. Moving the wrench upward
slightly will increase the clearance
between the rear roof and the stored
front roof and facilitate the procedure.

5. Turn the L-shaped hexagonal wrench

(Large) counterclockwise 13 times or
more while pressing the wrench
against the bolt.

NOTE



The bolt cannot be removed
completely.



If it is hard to turn the bolt, repeat
Step 3 a few times.

6. Hook the wire to the link pin shown in

the figure.

If Trouble Arises

When the Roof Cannot be Closed

7-61

MX-5_8GV5-EA-18E_Edition3

2018-7-17 15:48:16