Satellite Radio:; Preset Channel:; Auto Memory Tuning:- Page 12

2011 Mazda RX-8 Rx 8 Smart Start Guide

background image

Audio Controls With Navigation

21

22

AUDiO SYSTEM ON 

Push the Power/Volume button to 

turn the radio on.

MEDiA SELECTiON

Push the SOURCE button to select 

the appropriate on-screen button: 

Radio:

 Select FM or AM button 

for FM1, FM2, or AM band. The 

selected band will be indicated in the 

Information Display.

DiSC:

 Select for CD player.

Satellite Radio:

 Select SAT for 

SIRIUS XM Radio

®

. If your vehicle 

is equipped with SIRIUS XM Radio

®

 

(satellite radio antenna on roof or 

trunk lid), your new Mazda includes 

free

 introductory subscription 

with a limited term trial offer. Call 

888-539-7474 to activate! See the 

Owner’s Manual and/or dealer for 

details. Contact your Mazda dealer 

about adding SIRIUS XM Radio

®

 

if your MAZDA RX-8 is not already 

equipped with it.

AUX1:

 Select to switch to 

auxiliary jack.

AUX2:

 Not used.

TUNiNg 

The radio has the following 

tuning controls: 
  •

   

Manual:

 Turn the 

TUNE/AUDIO dial to manually 

change the frequency.

 

  •

   

Seek/Track:

 Push and hold 

the SEEK/TRACK buttons 

 

 

 to automatically seek a 

higher or lower frequency 

 

or track, depending on 

 

media selected.

   •

   

Scan:

 Push the SCAN button 

to automatically sample strong 

stations for seconds each. Push 

again to cancel.

 

  •

   

Preset Channel:

 Can be used 

to store 8 AM, 16 FM and 18 

SIRIUS

®

 Satellite stations.

   

1

  Push the SOURCE button.

   

2

 

Select AM/FM or SAT.

   

3

  Select AM, FM1, FM2, SAT1,  

      SAT2 or SAT3.

   

4

  Tune to the desired station  

      using the SEEK/TRACK 

 

      button or by turning the 

 

      TUNE/AUDIO dial.

   

5

  Select and hold any channel  

      preset on-screen button for  
      about two seconds until a 

 

      beep sound is heard.
    •   Repeat to store other stations.
  •

   

Auto Memory Tuning:

 

Select and hold the AUTO-M 

 

on-screen button until beep is 
heard to store an additional 

 

8 stations on each FM and AM 
band without disturbing the 
previously stored stations. This 
is useful when driving in an area 
where the local stations are not 
known. Refer to the Owner’s 
Manual for complete details.

Outside Temperature Display

Push OUTSIDE button to display 

outside temperature in the 

information display.

NOTE:

 

GPS automatically sets 

the clock, however, it may be 
necessary to adjust hours in 
different time zones or daylight 
saving time.

1.  

Push the 

MENU

 button.

2.

 Select the Set Clock tab. 

3.

  Choose a 24-hour display or 

a 12-hour display.

4.

  Use the 

+

 hour and 

-

 hour   

tabs to enter the correct hour.

5.

  Use the 

+30

 min (minutes) and 

-30

 min to move minutes ahead 

or back by 30 minutes.

6.

 Push the OK tab to exit.

SETTiNg YOUR CLOCK

1.

   Place the ignition in the ACC 

or ON position. 

2.

  Push 

LOAD /

3.

   Push the 

LOAD

 on-screen 

button lightly.

4.

   Wait for the screen to lower. 

5.   

Insert the CD after “IN” 
is displayed on the 

 

Information Display. 

 

The CD will begin playing 

 

after the screen closes.

TO LOAD/PLAY A CD

www.MazdaUSA.com

280340_11a_RX-8_SSG_081010.indd   22-23

8/10/10   3:12 PM

Detailed Information for 2011 Mazda RX-8 Rx 8 Smart Start Guide

Lists of information found in 2011 Mazda RX-8 Rx 8 Smart Start Guide - Page 12

  • 3. 4 Tune to the desired station using the SEEK/TRACK button or by turning the TUNE/AUDIO dial.
  • 1. Push the MENU button.
  • 2. Select the Set Clock tab.
  • 3. Choose a 24-hour display or a 12-hour display.
  • 4. Use the + hour and - hour tabs to enter the correct hour.
  • 5. Use the +30 min (minutes) and -30 min to move minutes ahead or back by 30 minutes.
  • 6. Push the OK tab to exit.
  • 1. Place the ignition in the ACC or ON position.
  • 2. Push LOAD / 3.
  • 4. Wait for the screen to lower.
  • 5. Insert the CD after “IN” is displayed on the Information Display.
  • Manual: Turn the TUNE/AUDIO dial to manually change the frequency.
  • Seek/Track: Push and hold the SEEK/TRACK buttons to automatically seek a higher or lower frequency or track, depending on media selected.
  • Scan: Push the SCAN button to automatically sample strong stations for seconds each.
  • Preset Channel: Can be used to store 8 AM, 16 FM and 18 SIRIUS ® Satellite stations.
  • Repeat to store other stations.
  • Auto Memory Tuning: Select and hold the AUTO-M on-screen button until beep is heard to store an additional 8 stations on each FM and AM band without disturbing the previously stored stations.