2006 Tribute; Owners Guide (post-2002-fmt); Replacing front parking lamp/turn signal bulbs- Page 40

2006 Mazda Tribute Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual
background image

10. Connect the electrical connector into the rear of the bulb until it

“snaps.”

Replacing front parking lamp/turn signal bulbs

For bulb replacement, see your authorized Mazda dealership.

Replacing side repeater bulbs

1. Turn the headlamp switch to

off.

2. Carefully pry the lamp assembly

away from the fender.

3. Rotate the bulb socket

counterclockwise to remove it
from the lamp assembly.

4. Pull the bulb straight out.

Reverse steps to reinstall bulb(s).

Replacing foglamp bulbs

For bulb replacement, see your authorized Mazda dealership.

Replacing brake/tail/turn/backup lamps bulbs

The brake/tail/turn/backup lamp bulbs are located in the tail lamp
assembly, one just below the other. Follow the same steps to replace
either bulb:

1. Open the liftgate to expose the

lamp assemblies.

2. Remove the two screws from

the lamp assembly.

3. Carefully remove the lamp

assembly by pulling it rearward.

4. Twist the bulb socket

counterclockwise and remove
from lamp assembly.

2006 Tribute

(j14)

Owners Guide (post-2002-fmt)
USA

(fus)

Lights

40

Detailed Information for 2006 Mazda Tribute Owners Manual

Lists of information found in 2006 Mazda Tribute Owners Manual - Page 40

  • 1. Turn the headlamp switch to off.
  • 2. Carefully pry the lamp assembly away from the fender.
  • 3. Rotate the bulb socket counterclockwise to remove it from the lamp assembly.
  • 4. Pull the bulb straight out.
  • 1. Open the liftgate to expose the lamp assemblies.
  • 2. Remove the two screws from the lamp assembly.
  • 3. Carefully remove the lamp assembly by pulling it rearward.
  • 4. Twist the bulb socket counterclockwise and remove from lamp assembly.