2009 Tribute; Owners Guide, 1st Printing; 1. Make sure that you have the correct tire and wheel size.- Page 150

2009 Mazda Tribute Owners Manaul

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

Driver Controls
Locks and Security
Seating and Safety Restraints
Tires, Wheels and Loading
Driving
Maintenance and Specifications
background image

WARNING:

Only use replacement tires and wheels that are the

same size, load index, speed rating and type (such as P-metric

versus LT-metric or all-season versus all-terrain) as those originally
provided by Mazda. The recommended tire and wheel size may be
found on either the Safety Compliance Certification Label or the Tire
Label which is located on the B-Pillar or edge of the driver’s door. If
this information is not found on these labels then you should consult
your Mazda dealer. Use of any tire or wheel not recommended by
Mazda can affect the safety and performance of your vehicle, which
could result in an increased risk of loss of vehicle control, vehicle
rollover, personal injury and death. Additionally the use of
non-recommended tires and wheels could cause steering, suspension,
axle or transfer case/power transfer unit failure. If you have questions
regarding tire replacement, see an authorized dealer.

WARNING:

When mounting replacement tires and wheels, you

should not exceed the maximum pressure indicated on the

sidewall of the tire to set the beads without additional precautions
listed below. If the beads do not seat at the maximum pressure
indicated, re-lubricate and try again.
When inflating the tire for mounting pressures up to 20 psi (1.38 bar)
greater than the maximum pressure on the tire sidewall, the following
precautions must be taken to protect the person mounting the tire:

1. Make sure that you have the correct tire and wheel size.

2. Lubricate the tire bead and wheel bead seat area again.

3. Stand at a minimum of 12 ft. (3.66 m) away from the tire
wheel assembly.

4. Use both eye and ear protection.
For a mounting pressure more than 20 psi (1.38 bar) greater
than the maximum pressure, a Mazda Dealer or other tire
service professional should do the mounting.
Always inflate steel carcass tires with a remote air fill with the
person inflating standing at a minimum of 12 ft. (3.66 m) away
from the tire wheel assembly.

Important:

Remember to replace the wheel valve stems when the road

tires are replaced on your vehicle.

It is recommended that the two front tires or two rear tires generally be
replaced as a pair.

2009 Tribute

(j14)

Owners Guide, 1st Printing
USA

(fus)

Tires, Wheels and Loading

150

Detailed Information for 2009 Mazda Tribute Owners Manaul

Lists of information found in 2009 Mazda Tribute Owners Manaul - Page 150

  • 1.38 bar) greater than the maximum pressure on the tire sidewall, the following precautions must be taken to protect the person mounting the tire: 1.
  • 2. Lubricate the tire bead and wheel bead seat area again.
  • 3. Stand at a minimum of 12 ft.
  • 3.66 m) away from the tire wheel assembly.
  • 4. Use both eye and ear protection.
  • 1.38 bar) greater than the maximum pressure, a Mazda Dealer or other tire service professional should do the mounting.
  • 3.66 m) away from the tire wheel assembly.