Power Outlet 120 Volt; Alternating Current; Instruments and Controls- Page 113

2013 Buick encore Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

Seats and Restraints
Instruments and Controls
Driving and Operating
Vehicle Care
Customer Information
background image

Black plate (7,1)

Buick Encore Owner Manual - 2013 - crc - 1/8/13

Instruments and Controls

5-7

battery. Always unplug electrical
equipment when not in use and
do not plug in equipment that
exceeds the maximum 20 ampere
rating.

Certain electrical accessories may
not be compatible with the
accessory power outlet and could
overload vehicle or adapter fuses.
If a problem is experienced, see
your dealer.

When adding electrical equipment,
be sure to follow the installation
instructions included with the
equipment. See

Add-On Electrical

Equipment on page 9-47

.

Notice:

Hanging heavy

equipment from the power outlet
can cause damage not covered
by the vehicle warranty. The
power outlets are designed for
accessory power plugs only, such
as cell phone charge cords.

Power Outlet 120 Volt
Alternating Current

The vehicle may have a power
outlet on the rear of the center
console. It can be used to plug in
electrical equipment that uses a
maximum limit of 150 watts.

An indicator light on the outlet turns
on to show it is in use. The light
comes on when the ignition is in
ON/RUN and equipment requiring
less than 150 watts is plugged into
the outlet, and no system fault is
detected.

The indicator light does not come on
when the ignition is in LOCK/OFF or
if the equipment is not fully seated
into the outlet.

If equipment is connected using
more than 150 watts or a system
fault is detected, a protection circuit
shuts off the power supply and the
indicator light turns off. To reset the
circuit, unplug the item and plug it
back in or turn the Retained
Accessory Power (RAP) off and
then back on. See

Retained

Accessory Power (RAP) on
page 9-19

. The power restarts when

equipment using 150 watts or less is
plugged into the outlet and a system
fault is not detected.