14
Automatic Transmission
Manual Mode
Manual Mode allows the driver to manually
select the range of gear positions. This
feature can be used to drive the vehicle
in a sportier manner or to downshift when
driving on a downhill grade to provide
engine braking.
1. Move the shift lever to the Manual (M)
position.
2. Press the + (plus) or – (minus) button
on the shift lever to upshift or downshift.
The current gear will be displayed on
the Driver Information Center.
If vehicle speed is too high or too low for
the requested gear, the shift will not occur.
See Driving and Operating in your Owner Manual.
Traction Control and StabiliTrak® Systems
The traction control system limits wheelspin and the StabiliTrak stability control system
assists with directional control of the vehicle in difficult driving conditions. Both systems
turn on automatically every time the vehicle is started.
Turning Off Traction Control
Traction control should be turned off if the vehicle is stuck and rocking the vehicle is
required.
Press the StabiliTrak/Traction Control button. The
Traction Control Off light
will illuminate in the instrument cluster. Press the button again to turn on the system.
See Driving and Operating in your Owner Manual.
Side Blind Zone Alert
F
While driving, the Side Blind Zone Alert system displays a warning symbol on the left or
right side mirror when a vehicle is detected in that side blind zone area. If the turn signal is
activated when a vehicle has been detected, the warning symbol will flash.
To turn the system Off or On, press the CONFIG button to access the Configure menu
and select Vehicle > Collision/Detection Systems > Side Blind Zone Alert.
Note: The system may not be available in heavy rainstorms or if dirt or snow builds up on the corners
of the rear bumper. Keep the vehicle clean for proper operation.
See Driving and Operating in your Owner Manual.
F
Optional equipment