Remote Vehicle Start; Keys, Doors, and Windows- Page 34

2019 Buick encore Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

01-In Brief_en_US
03-Seats and Restraints_en_US
05-Instruments and Controls_en_US
09-Driving and Operating_en_US
10-Vehicle Care_en_US
Vehicle Care
background image

Buick Encore Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

12163005) - 2019 - crc - 9/17/18

Keys, Doors, and Windows

33

1. Press the button on the back of

the RKE transmitter and pull
the key out. Never pull the key
out without pressing the button.

2. Separate the two halves of the

transmitter using a flat tool
inserted into the area near the
key slot.

3. Remove the battery by pushing

on the battery and sliding it
toward the bottom of the
transmitter.

4. Insert the new battery, positive

side facing the back cover.
Push the battery down until it is
held in place. Replace with a
CR2032 or equivalent battery.

5. Snap the battery cover back on

to the transmitter.

Remote Vehicle Start

The vehicle may have this feature
that allows you to start the engine
from outside the vehicle.

/

:

This button will be on the RKE

transmitter if the vehicle has remote
start.

The climate control system will use
the previous settings during a
remote start. The rear window
defogger may come on during a
remote start based on cold ambient
conditions. The rear window
defogger indicator light does not
come on during a remote start. If the
vehicle has heated seats, they may
come on during a remote start. See

Heated Front Seats

0

54

.

Laws in some local communities
may restrict the use of remote
starters. For example, some laws
require a person using remote start
to have the vehicle in view. Check
local regulations for any
requirements.

Detailed Information for 2019 Buick encore Owner Manual

Lists of information found in 2019 Buick encore Owner Manual - Page 34

  • 1. Press the button on the back of the RKE transmitter and pull the key out.
  • 2. Separate the two halves of the transmitter using a flat tool inserted into the area near the key slot.
  • 3. Remove the battery by pushing on the battery and sliding it toward the bottom of the transmitter.
  • 4. Insert the new battery, positive side facing the back cover.
  • 5. Snap the battery cover back on to the transmitter.