Remote Vehicle Start; Keys, Doors, and Windows- Page 15

2020 Buick Envision Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

02-Seats and Restraints_en_US
04-Instruments and Controls_en_US
08-Driving and Operating_en_US
09-Vehicle Care_en_US
background image

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

13555857) - 2020 - CRC - 3/26/19

14

Keys, Doors, and Windows

Caution

When replacing the battery, do
not touch any of the circuitry on
the transmitter. Static from your
body could damage the
transmitter.

The battery is not rechargeable. To
replace the battery:

1. Press the button on the

transmitter to access the key.

2. Separate the two halves of the

transmitter using a flat tool
inserted into the bottom of the
transmitter.

3. Remove the battery by pushing

on the battery and sliding it
toward the bottom of the
transmitter.

4. Insert the new battery, positive

side facing the back cover.
Push the battery down until it is
held in place. Replace with a
CR2032 or equivalent battery.

5. Snap the battery cover back on

to the transmitter.

Remote Vehicle Start

With remote start, the climate
control system will come on when
the vehicle is started remotely
depending on the outside
temperature.

The rear defog and heated and
ventilated seats, if equipped, may
also come on. See

Heated and

Ventilated Front Seats

0

41

and

Vehicle Personalization

0

133

.

Laws in some communities may
restrict the use of remote starters.
Check local regulations for any
requirements on remote starting of
vehicles.

Detailed Information for 2020 Buick Envision Owner Manual

Lists of information found in 2020 Buick Envision Owner Manual - Page 15

  • 1. Press the button on the transmitter to access the key.
  • 2. Separate the two halves of the transmitter using a flat tool inserted into the bottom of the transmitter.
  • 3. Remove the battery by pushing on the battery and sliding it toward the bottom of the transmitter.
  • 4. Insert the new battery, positive side facing the back cover.
  • 5. Snap the battery cover back on to the transmitter.