Air Vents; Maintenance; Passenger Compartment Air Filter- Page 188

2011 Buick Regal Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

In Brief
Seats and Restraints
Instruments and Controls
Driving and Operating
Vehicle Care
background image

Black plate (4,1)

Buick Regal Owner Manual - 2011

8-4

Climate Controls

Air Vents

Use the louvers located on the air
vents to change the direction of the
airflow.

To open a vent, move the
thumbwheel to | . To close the vent,
move the thumbwheel to

9

.

Operation Tips

.

Keep all outlets open whenever
possible for best system
performance.

.

Keep the paths under all seats
clear of objects to help circulate
the air inside the vehicle more
effectively.

.

Use of non-GM approved hood
deflectors can adversely affect
the performance of the system.

Maintenance

Passenger Compartment
Air Filter

The filter removes dust, pollen, and
other airborne irritants from outside
air that is pulled into the vehicle.

The filter should be replaced as part
of routine scheduled maintenance.
See

Scheduled Maintenance on

page 11

2

for replacement intervals.

To find out what type of filter to use,
see

Maintenance Replacement

Parts on page 11

8

.

The passenger compartment air
filter can be accessed by removing
the entire glove box.

1. Open the passenger side door.

Remove the end cover located
on the side of the instrument
panel in the top right corner.
Remove the screw affixed to the
side of the glove box.

2. Open the glove box door and

remove the attached screws
from around the glove box.

3. Lower the loosened glove box

housing.

4. Unplug both wire cables and

remove the glove box.

5. Pull the three tabs to release

and open the filter door.

Detailed Information for 2011 Buick Regal Owner Manual

Lists of information found in 2011 Buick Regal Owner Manual - Page 188

  • 1. Open the passenger side door.
  • 2. Open the glove box door and remove the attached screws from around the glove box.
  • 3. Lower the loosened glove box housing.
  • 4. Unplug both wire cables and remove the glove box.
  • 5. Pull the three tabs to release and open the filter door.