Headlamps, Front Turn Signal and Parking Lamps; Vehicle Care; Headlamps, Front Turn- Page 308

Black plate (34,1)

Buick Regal Owner Manual - 2012

10-34

Vehicle Care

Headlamps, Front Turn

Signal and Parking

Lamps

Base Headlamp Assembly

(Passenger Side Shown, Driver

Side Similar)

A. High

�

Beam Headlamp

B. Turn Signal Lamp
C. Low

�

Beam Headlamp/Daytime

Running Lamp (DRL)

D. Parking Lamp
E. Sidemarker Lamp

Uplevel Headlamp Assembly

(Passenger Side Shown, Driver

Side Similar)

A. High/Low

�

Beam Headlamp

�

To

be replaced at the dealer only

B. Turn Signal Lamp

Low-Beam Headlamps/Daytime

Running Lamps (DRL),
High-Beam Headlamps (Base)

1. For the driver side bulb, remove

the windshield washer bottle
filler neck by firmly pulling it
straight up and out of the bottle.

2. Remove the outside cap for the

low-beam headlamp/DRL bulb
replacement from the back of the
headlamp assembly.

3. Remove the inside cap for the

high-beam headlamp bulb
replacement from the back of the
headlamp assembly.

4. Disconnect the electrical

connector.

5. Remove the bulb socket from

the headlamp assembly.

6. Replace the bulb in the bulb

socket.

7. Install the bulb socket in the

headlamp assembly.

8. Reverse Steps 1 through 4 to

reinstall the outside or inside cap
on the headlamp assembly.

High/Low

�

Beam Headlamps

(Uplevel)

The high/low

�

beam headlamps on

the uplevel headlamp system are
High Intensity Discharge (HID) and
should be replaced at the dealer.