Tire Messages; Transmission Messages; Instruments and Controls- Page 140

2016 Buick Regal Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

In Brief
Seats and Restraints
Instruments and Controls
Driving and Operating
Vehicle Care
background image

Buick Regal Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9159380) - 2016 - CRC - 2/23/16

Instruments and Controls

139

Tire Messages

SERVICE TIRE MONITOR
SYSTEM

This message displays if there is a
problem with the Tire Pressure
Monitor System (TPMS). See

Tire

Pressure Monitor Operation

0

264

.

TIRE LEARNING ACTIVE

This message displays when the
system is learning new tires. See

Tire Pressure Monitor
Operation

0

264

.

TIRE PRESSURE LOW ADD
AIR TO TIRE

On vehicles with the Tire Pressure
Monitor System (TPMS), this
message displays when the
pressure in one or more of the
vehicle's tires is low.

The low tire pressure warning light
will also come on. See

Tire

Pressure Light

0

121

.

If a tire pressure message displays,
inflate the tires until the tire
pressure is equal to the values
shown on the Tire and Loading
Information label. See

Tires

0

253

,

Vehicle Load Limits

0

171

and

Tire

Pressure

0

261

.

More than one tire pressure
message can be received at a time.
The DIC also shows the tire
pressure values. See

Driver

Information Center (DIC) (Base
Level Cluster)

0

125

or

Driver

Information Center (DIC) (Uplevel
Cluster)

0

127

.

Transmission Messages

SERVICE TRANSMISSION

This message displays if there is a
problem with the transmission. See
your dealer.

SHIFT TO PARK

This message displays when the
transmission needs to be shifted to
P (Park). This may appear when
attempting to remove the key from
the ignition or from the vehicle if the
vehicle is not in P (Park).

TRANSMISSION HOT

IDLE

ENGINE

This message displays and a chime
sounds if the transmission fluid in
the vehicle gets hot. Driving with the
transmission fluid temperature high
can cause damage to the vehicle.
Stop the vehicle and let it idle to
allow the transmission to cool. This
message clears when the fluid
temperature reaches a safe level.