Driving position memory- Page 106

106

3-3. Adjusting the seats

and then close the driver’s door. If 2 or 
more keys are in the vehicle, the driv-
ing position cannot be recorded prop-
erly.

1

Check that the shift lever is in P.

2

Turn the engine switch to IGNI-
TION ON mode.

3

Recall the driving position that you 
want to record.

4

While pressing the recalled button, 
press and hold the door lock switch 
(either lock or unlock) until the 
buzzer sounds.

If the button could not be registered, the 

buzzer sounds continuously for approxi-

mately 3 seconds.

■

Cancelation procedure

Carry only the key you want to cancel 
and then close the driver’s door. If 2 or 
more keys are in the vehicle, the driv-
ing position cannot be canceled prop-
erly.

1

Turn the engine switch to IGNI-
TION ON mode.

2

While pressing the “SET” button, 
press and hold the door lock switch 
(either lock or unlock) until the 
buzzer sounds twice.

If the button could not be canceled, the 

buzzer sounds continuously for approxi-

mately 3 seconds.

■

Recall procedure

1

Make sure that the doors are 
locked before recalling the driving 
position. Carry the electronic key 
that has been registered to the driv-
ing position, and then unlock and 
open the driver’s door using the 
smart access system with push-but-
ton start system or wireless remote 
control.

The driving position will move to the 

recorded position (not including the steer-

ing wheel). However, the seat will move to 

a position slightly behind the recorded 

position in order to make entering the vehi-

cle easier.
If the driving position is in a position that 

has already been recorded, the seat and 

outside rear view mirrors will not move.

2

Turn the engine switch to ACCES-
SORY mode or IGNITION ON 
mode, or fasten a seat belt.

The seat and steering wheel will move to 

the recorded position.

■

Recalling the driving position using the 

memory recall function

●

Different driving positions can be regis-

tered for each electronic key. Therefore, 

the driving position that is recalled may 

be different depending on the key being 

carried.

●

If a door other than the driver’s door is 

unlocked with the smart access system 

with push-button start system, the driving 

position cannot be recalled. In this case, 

press the driving position button which 

has been set.

■

Customization

Some functions can be customized. 

(



P.388)