7-1. Essential information; If your vehicle has to be ; stopped in an emergency- Page 320

320

7-1. Essential information

7-1.Essential information

Press the switch to flash all of the turn 
signal lights.

To turn them off, press the switch once 
again.

■

Emergency flashers

●

If the emergency flashers are used for a 

long time while the engine is not operat-

ing, the battery may discharge.

●

If any of the SRS airbags deploy (inflate) 

or in the event of a strong rear impact, the 

emergency flashers will turn on automati-

cally. 

The emergency flashers will turn off auto-

matically after operating for approxi-

mately 20 minutes. To manually turn the 

emergency flashers off, press the switch 

twice. 

(The emergency flashers may not turn on 

automatically depending on the force of 

the impact and conditions of the colli-

sion.)

1

Steadily step on the brake pedal 
with both feet and firmly depress it.

Do not pump the brake pedal repeatedly 

as this will increase the effort required to 

slow the vehicle.

2

Shift the shift lever to N.



If the shift lever is shifted to N

3

After slowing down, stop the vehi-
cle in a safe place by the road.

4

Stop the engine.



If the shift lever cannot be shifted to 
N

3

Keep depressing the brake pedal 
with both feet to reduce vehicle 
speed as much as possible.

4

To stop the engine, press and hold 
the engine switch for 2 consecutive 

Emergency flashers

The emergency flashers are used to 
warn other drivers when the vehicle 
has to be stopped on the road due 
to a breakdown, etc.

Operating instructions

If your vehicle has to be 
stopped in an emergency

Only in an emergency, such as if it 
becomes impossible to stop the 
vehicle in the normal way, stop the 
vehicle using the following proce-
dure:

Stopping the vehicle