Windshield wipers and - Page 153

153

4-3. Operating the lights and wipers

4

Driving

When AUTO mode is selected, the 
sensor sensitivity can be adjusted by 
turning the switch ring.

6

Increases the sensitivity

7

Decreases the sensitivity

8

 Washer/wiper dual opera-

tion

Pulling the lever operates the wipers and 
washer.
The wipers will automatically operate a 
couple of times after the washer squirts.
Vehicles with headlight cleaners:
When the engine switch is in IGNITION 
ON mode and the headlights are on, if the 
lever is pulled, the headlight cleaners will 
operate once. After this, the headlight 
cleaners will operate every 5th time the 

lever is pulled.

The wipers can be used as intermittent 
windshield wipers, which operate 
regardless of vehicle speed or amount 
of raindrops. The intermittent wind-
shield wiper operation can be switched 
when the vehicle is stopped and the 
wiper is off. The wiper operation can-
not be switched during AUTO mode 
or while the intermittent windshield 
wipers are operating.

Press and hold 

 until the AUTO 

mode indicator stops flashing.

If 

 is pressed and held until the AUTO 

mode indicator stops flashing again, it will 
return to its previous state.
The wiper can be switched when the vehi-
cle is stopped and the wipers are off.

 or 

Low speed operation

 or 

High speed operation

Wiper lever oper-

ation

Wiper operation

Switching between the intermit-
tent windshield wipers and 
rain-sensing windshield wipers 
(vehicles with rain-sensing wind-
shield wipers)