Type B- Page 318

318

6-3. Do-it-yourself maintenance

11

Install the cover.

12

Remove the protective tape.

■

When replacing the front turn signal 

lights (bulb type)

When the washer fluid filler opening is 

removed with a large amount of washer 

fluid contained in the washer tank, washer 

fluid may spill onto the vehicle and cleaning 

may be required.

WARNING

■

Replacing light bulbs

●

Turn off the lights. Do not attempt to 

replace the bulb immediately after 

turning off the lights.

The bulbs become very hot and may 

cause burns.

●

Do not touch the glass portion of the 

light bulb with bare hands. When it is 

unavoidable to hold the glass portion, 

use and hold with a clean dry cloth to 

avoid getting moisture and oils on the 

bulb.

Also, if the bulb is scratched or 

dropped, it may blow out or crack.

●

Fully install light bulbs and any parts 

used to secure them. Failure to do so 

may result in heat damage, fire, or 

water entering the headlight unit. This 

may damage the headlights or cause 

condensation to build up on the lens.

■

To prevent damage or fire

●

Make sure bulbs are fully seated and 

locked.

●

Check the wattage of the bulb before 

installing to prevent heat damage.