Forward-facing - Page 48

48

1-2. Child safety



Booster type



High back type

4

Sit the child in the child restraint 
system. Fit the seat belt to the child 
restraint system according to the 
manufacturer’s instructions and 
insert the plate into the buckle. 
Make sure that the belt is not 
twisted.

Check that the shoulder belt is correctly 

positioned over the child’s shoulder and 

that the lap belt is as low as possible. 

(



P.24)

■

Removing a child restraint system 
installed with a seat belt

Press the buckle release button and 
fully retract the seat belt.

When releasing the buckle, the child 
restraint system may spring up due to the 
rebound of the seat cushion. Release the 
buckle while holding down the child 
restraint system.
Since the seat belt automatically reels itself, 
slowly return it to the stowing position.

WARNING

■

When installing a child restraint sys-

tem

Observe the following precautions. 

Failure to do so may result in death or 

serious injury.

●

Do not allow children to play with the 

seat belt. If the seat belt becomes 

twisted around a child’s neck, it may 

lead to choking or other serious inju-

ries that could result in death.

If this occurs and the buckle cannot be 

unfastened, scissors should be used to 

cut the belt.

●

Ensure that the belt and plate are 

securely locked and the seat belt is not 

twisted.

●

Shake the child restraint system left 

and right, and forward and backward 

to ensure that it has been securely 

installed.