Multi-information - Page 91

91

3-2. Opening, closing and locking the doors and trunk

3

Be

fore
 dri
ving

To prevent unintended triggering of the 

alarm, unlock the doors using the wireless 

remote control and open and close a door 

once after the settings have been changed. 

(If a door is not opened within 60 seconds 
after 

 is pressed, the doors will be 

locked again and the alarm will automati-

cally be set.)

In a case that the alarm is triggered, imme-

diately stop the alarm. (



P.61)

■

Impact detection door lock release sys-

tem

In the event that the vehicle is subject to a 

strong impact, all the doors are unlocked. 

Depending on the force of the impact or the 

type of accident, however, the system may 

not operate.

■

Operation signals

A buzzer sounds and the emergency flash-

ers flash to indicate that the doors have 

been locked/unlocked. (Locked: once; 

Unlocked: twice)
A buzzer sounds to indicate that the win-

dows and moon roof are operating.

■

Security feature

If a door is not opened within approximately 

60 seconds after the vehicle is unlocked, 

the security feature automatically locks the 

vehicle again.

■

Welcome light illumination control

The front position, tail and license plate 

lights automatically turn on at night when 

the doors are unlocked using the entry 

function or wireless remote control if the 

light switch is in the “AUTO” position.

■

When the doors cannot be locked by the 

lock sensor on the upper part of the 

door handle

If the door will not lock even when the top-

side sensor area is touched, try touching 

both the topside and underside sensor 

areas at the same time.

■

Door lock buzzer

If an attempt to lock the doors is made when 

a door is not fully closed, a buzzer sounds 

continuously for 5 seconds. Fully close the 

door to stop the buzzer, and lock the vehi-

cle once more.

■

Setting the alarm

Locking the doors will set the alarm system. 

(



P.61)

■

Using the mechanical key

The doors can also be locked and unlocked 

with the mechanical key. (



P.351)

■

Conditions affecting the operation of 

the smart access system with push-but-

ton start or wireless remote control



P.98

■

If the smart access system with 

push-button start or the wireless remote 

control does not operate properly

Use the mechanical key to lock and unlock 

the doors. (



P.351)

Replace the key battery with a new one if it 

is depleted. (



P.308)

Multi-information 

display/Beep

Unlocking function

Exterior: Beeps 3 

times

Interior: Pings once

Holding the driver’s 
door handle unlocks 
only the driver’s 
door.

Holding the front 
passenger’s door 
handle unlocks all 
the doors.

Exterior: Beeps 

twice

Interior: Pings once

Holding either front 
door handle unlocks 
all the doors.