Flat Tire; In Case of an Emergency; Removing a Flat Tire- Page 166

7-6

In Case of an Emergency

Flat Tire

Form No. 8Q50-EA-01G

▼

▼

▼

▼

Removing a Flat Tire

1. Pry off the wheel cover with the 

beveled end of the lug wrench.

2. Loosen the lug nuts by turning them 

counterclockwise one turn each, but 
don’t remove any until the tire has been 
raised off the ground.

3. Place the jack under the jacking 

position closest to the tire being 
changed.

NOTE

Force the end of the wrench firmly 
between wheel and cover, or removal 
will be difficult.

Align the notch on the wheel cover 
with the valve stem when installing it.

Damage could occur during 
installation if the wheel cover is not 
properly aligned.

Lug wrench

Wheel cover

CAUTION

Tire valve

Jacking position

J94S.book  Page 6  Saturday, June 23, 2001  1:04 PM