2004 Mazda B Series; Owners Guide (post-2002-fmt); If your vehicle is equipped with a 3.0L V6 engine,- Page 221

2004 Mazda B2300 Truck B Series Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual
background image

Check the power steering fluid. Refer to the service maintenance section
for the service interval schedules. If adding fluid is necessary, use only
MERCON

ATF.

1. Start the engine and let it run until it reaches normal operating

temperature (the engine coolant temperature gauge indicator will be
near the center of the normal area between H and C).

2. While the engine idles, turn the steering wheel left and right several

times.

3. Turn the engine off.

4.

If your vehicle is equipped with a 3.0L V6 engine,

check the

fluid level on the dipstick. It should be within the FULL HOT range.
Do not add fluid if the level is within this range.

5.

If your vehicle is equipped with a 4.0L SOHC V6 or 2.3L I4
engine,

check the fluid level in the reservoir. It should be between

the MIN and MAX lines. Do not add fluid if the level is within this
range.

6. If the fluid is low, add fluid in small amounts, continuously checking

the level until it reaches the FULL HOT range. Be sure to put the
dipstick back in the reservoir.

BRAKE FLUID RESERVOIR

The fluid level will drop slowly as
the brakes wear, and will rise when
the brake components are replaced.
Fluid levels below the “MAX” line
that do not trigger the brake system
warning lamp are within the normal
operating range, there is no need to
add fluid. If the fluid levels are outside of the normal operating range,
the performance of your brake system could be compromised, seek
service from your Mazda dealer immediately.

WARNING: Brake fluid is toxic. If brake fluid contacts the
eyes, flush eyes with running water for 15 minutes. Seek
medical attention if irritation persists. If taken internally, drink
water and induce vomiting. Seek medical attention immediately.

MAX

2004 Mazda B Series

(mbs)

Owners Guide (post-2002-fmt)
USA English

(fus)

Maintenance and Specifications

221

Detailed Information for 2004 Mazda B2300 Truck B Series Owners Manual

Lists of information found in 2004 Mazda B2300 Truck B Series Owners Manual - Page 221

  • 1. Start the engine and let it run until it reaches normal operating temperature (the engine coolant temperature gauge indicator will be near the center of the normal area between H and C).
  • 2. While the engine idles, turn the steering wheel left and right several times.
  • 3. Turn the engine off.
  • 4. If your vehicle is equipped with a 3.
  • 5. If your vehicle is equipped with a 4.
  • 2.3L I4 engine, check the fluid level in the reservoir.
  • 6. If the fluid is low, add fluid in small amounts, continuously checking the level until it reaches the FULL HOT range.

Related Documents for 2004 Mazda B2300 Truck B Series Owners Manual