Locks and Security- Page 66

2003 Mazda B2300 B Series Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

background image

If you do not have at least 2 previously programmed keys, you must
take your vehicle to your dealer to have the spare key(s)
programmed.

1. Insert a previously programmed

coded key into the ignition.

2. Turn the ignition from the 3

(OFF) position to the 4 (ON)
position. Keep the ignition in
the 4 (ON) position for at least
one second, but no more than
10 seconds.

3. Turn the ignition to the 3 (OFF)

position, and remove the coded
key from the ignition.

4. Within ten seconds of removing the previously programmed coded

key, insert the other previously programmed coded key into the
ignition.

5. Turn the ignition from the 3 (OFF) position to the 4 (ON) position.

Keep the ignition in the 4 (ON) position for at least one second but
not more than 10 seconds.

6. Turn the ignition to the 3 (OFF) position, and remove the second

key from the ignition.

7. Within twenty seconds of removing the previously programmed

coded key, insert the unprogrammed key (new/valet key) into the
ignition.

8. Turn the ignition from the 3 (OFF) position to the 4 (ON) position.

Keep the ignition in the 4 (ON) position for at least one second.

9. Your new unprogrammed key is now programmed.

If the key has been successfully programmed it will start the vehicle’s
engine and the theft indicator light will illuminate for three seconds and
then go out. If the key was not successfully programmed, it will not start
your vehicle’s engine and the theft indicator light will flash on and off. If
failure repeats, bring your vehicle to your dealer to have the new key(s)
programmed.

To program additional new unprogrammed key(s), repeat this procedure
from step 1 for each additional key.

3

2

1

5

4

Locks and Security

66

Detailed Information for 2003 Mazda B2300 B Series Owners Manual

Lists of information found in 2003 Mazda B2300 B Series Owners Manual - Page 66

  • 1. Insert a previously programmed coded key into the ignition.
  • 2. Turn the ignition from the 3 (OFF) position to the 4 (ON) position.
  • 3. Turn the ignition to the 3 (OFF) position, and remove the coded key from the ignition.
  • 4. Within ten seconds of removing the previously programmed coded key, insert the other previously programmed coded key into the ignition.
  • 5. Turn the ignition from the 3 (OFF) position to the 4 (ON) position.
  • 6. Turn the ignition to the 3 (OFF) position, and remove the second key from the ignition.
  • 7. Within twenty seconds of removing the previously programmed coded key, insert the unprogrammed key (new/valet key) into the ignition.
  • 8. Turn the ignition from the 3 (OFF) position to the 4 (ON) position.
  • 9. Your new unprogrammed key is now programmed.
  • If you do not have at least 2 previously programmed keys, you must take your vehicle to your dealer to have the spare key(s) programmed.

Related Documents for 2003 Mazda B2300 B Series Owners Manual