2004 Mazda B Series; Owners Guide (post-2002-fmt); WARNING: When lifting a plastic-cased battery, excessive- Page 201

2004 Mazda B3000 Truck B Series Owners Manual2

Model Year
2014 Dodge Charger SRT Owner Manual
background image

WARNING: When lifting a plastic-cased battery, excessive
pressure on the end walls could cause acid to flow through the
vent caps, resulting in personal injury and/or damage to the
vehicle or battery. Lift the battery with a battery carrier or with
your hands on opposite corners.

WARNING: Keep batteries out of reach of children. Batteries
contain sulfuric acid. Avoid contact with skin, eyes or clothing.
Shield your eyes when working near the battery to protect
against possible splashing of acid solution. In case of acid
contact with skin or eyes, flush immediately with water for a
minimum of 15 minutes and get prompt medical attention. If
acid is swallowed, call a physician immediately.

WARNING: Battery posts, terminals and related accessories
contain lead and lead compounds. Wash hands after handling.

Because your vehicle’s engine is electronically controlled by a computer,
some control conditions are maintained by power from the battery. When
the battery is disconnected or a new battery is installed, the engine must
relearn its idle and fuel trim strategy for optimum driveability and
performance. To begin this process:

1. With the vehicle at a complete stop, set the parking brake.

2. Put the gearshift lever in P (Park), turn off all accessories and start

the engine.

3. Run the engine until it reaches normal operating temperature.

4. Allow the engine to idle for at least one minute.

5. Turn the A/C on and allow the engine to idle for at least one minute.

6. Drive the vehicle to complete the relearning process.

The vehicle may need to be driven to relearn the idle and fuel trim
strategy.

If you do not allow the engine to relearn its idle trim, the idle
quality of your vehicle may be adversely affected until the idle
trim is eventually relearned.

2004 Mazda B Series

(mbs)

Owners Guide (post-2002-fmt)
USA English

(fus)

Maintenance and Specifications

201

Detailed Information for 2004 Mazda B3000 Truck B Series Owners Manual2

Lists of information found in 2004 Mazda B3000 Truck B Series Owners Manual2 - Page 201

  • 1. With the vehicle at a complete stop, set the parking brake.
  • 2. Put the gearshift lever in P (Park), turn off all accessories and start the engine.
  • 3. Run the engine until it reaches normal operating temperature.
  • 4. Allow the engine to idle for at least one minute.
  • 5. Turn the A/C on and allow the engine to idle for at least one minute.
  • 6. Drive the vehicle to complete the relearning process.
  • The vehicle may need to be driven to relearn the idle and fuel trim strategy.
  • If you do not allow the engine to relearn its idle trim, the idle quality of your vehicle may be adversely affected until the idle trim is eventually relearned.

Related Documents for 2004 Mazda B3000 Truck B Series Owners Manual2