HEATER ONLY SYSTEM
(IF EQUIPPED)
1.
Fan speed adjustment:
Controls the volume of air
circulated in the vehicle.
2.
Temperature selection:
Controls the temperature of the
airflow in the vehicle.
3.
Air flow selections:
Controls the direction of the airflow in the
vehicle. See the following for a brief description on each control.
:
Distributes outside air through the instrument panel vents.
OFF:
Outside air is shut out and the fan will not operate.
:
Distributes outside air through the instrument panel vents and the
floor vents.
:
Distributes outside air through the floor vents.
:
Distributes outside air through the windshield defroster vents and
floor vents.
:
Distributes outside air through the windshield defroster vents.
OPERATING TIPS
•
To reduce fog build up on the windshield during humid weather, place
the air flow selector in the
position.
•
To reduce humidity build up inside the vehicle during cold or warm
weather, do not drive with the air flow selector in the OFF position.
•
Under normal weather conditions, do not leave the air flow selector in
OFF when the vehicle is parked. This allows the vehicle to “breathe”
using the outside air inlet vents.
•
Do not put objects under the front seats that will interfere with the air
flow to the back seats.
•
Remove any snow, ice or leaves from the air intake area at the base of
the windshield.
To aid in side window defogging/demisting in cold weather:
1. Select
2. Set the temperature control to full heat
3. Set the fan speed to HI
2004 Mazda B Series
(mbs)
Owners Guide (post-2002-fmt)
USA English
(fus)
Climate Controls
Climate Controls
31