Owners Guide, 1st Printing; Seating and Safety Restraints- Page 89
2009 Mazda B4000 Cab Plus 4 Truck Mazda B Series Owners Manual
Table of Contents
The driver and front passenger Belt-Minder
威
features can be
deactivated/activated by performing the following procedure:
Before following the procedure, make sure that:
•
The parking brake is set
•
the gearshift is in P (Park) (automatic transmission) or the neutral
position (manual transmission)
•
The ignition switch is in the off position
•
The driver and front passenger seat belts are unbuckled
WARNING:
While the design allows you to deactivate your
Belt-Minder
威
, this system is designed to improve your chances of
being safely belted and surviving an accident. We recommend you
leave the Belt-Minder
威
system activated for yourself and others who
may use the vehicle. To reduce the risk of injury, do not
deactivate/activate the Belt-Minder
威
feature while driving the vehicle.
1. Turn the ignition switch to the on position. DO NOT START THE
ENGINE.
2. Wait until the seat belt warning light turns off (Approximately one
minute).
•
Step 3 must be completed within 50 seconds after the seat belt
warning light turns off.
3. For the seating position being disabled, at a moderate speed, buckle
then unbuckle the seat belt nine times, ending in the unbuckled
state. Step 3 must be completed within 50 seconds after the seat
belt warning light turns off.
•
After Step 3, the seat belt warning light will be turned on for three
seconds.
4. Within approximately seven seconds of the light turning off, buckle
then unbuckle the seat belt.
•
This will disable the Belt-Minder
威
feature for that seating position if it
is currently enabled. As confirmation, the seat belt warning light will
flash four times per second for three seconds.
•
This will enable the Belt-Minder
威
feature for that seating position if it
is currently disabled. As confirmation, the seat belt warning light will
flash four times per second for three seconds, followed by three
seconds with the light off, then followed by the seat belt warning light
flashing four times per second for three seconds again.
2009 B-Series
(mbs)
Owners Guide, 1st Printing
USA
(fus)
Seating and Safety Restraints
89
Detailed Information for 2009 Mazda B4000 Cab Plus 4 Truck Mazda B Series Owners Manual
Lists of information found in 2009 Mazda B4000 Cab Plus 4 Truck Mazda B Series Owners Manual - Page 89
- 1. Turn the ignition switch to the on position.
- 2. Wait until the seat belt warning light turns off (Approximately one minute).
- 3. For the seating position being disabled, at a moderate speed, buckle then unbuckle the seat belt nine times, ending in the unbuckled state.
- 4. Within approximately seven seconds of the light turning off, buckle then unbuckle the seat belt.
- The parking brake is set • the gearshift is in P (Park) (automatic transmission) or the neutral position (manual transmission) • The ignition switch is in the off position • The driver and front passenger seat belts are unbuckled WARNING: While the design allows you to deactivate your Belt-Minder 威 , this system is designed to improve your chances of being safely belted and surviving an accident.
- Step 3 must be completed within 50 seconds after the seat belt warning light turns off.
- After Step 3, the seat belt warning light will be turned on for three seconds.
- This will disable the Belt-Minder 威 feature for that seating position if it is currently enabled.
- This will enable the Belt-Minder 威 feature for that seating position if it is currently disabled.
Related Documents for 2009 Mazda B4000 Cab Plus 4 Truck Mazda B Series Owners Manual
All trademarks are property of their respective owners. Tightrope
Interactive