2004 Mazda B Series; Owners Guide (post-2002-fmt); Safety belt maintenance- Page 76

2005 Mazda B4000 Truck B Series Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual
background image

3. Buckle then unbuckle the safety belt three times, ending with the

safety belt unbuckled. This can be done before or during BeltMinder
warning activation.

4. Turn on the parklamps/headlamps, turn off the

parklamps/headlamps.

5. Buckle then unbuckle the safety belt three times, ending with the

safety belt unbuckled.

•

After step 5 the safety belt warning light will be turned on for three
seconds.

6. Within seven seconds of the safety belt warning light turning off,

buckle then unbuckle the safety belt.

•

This will disable BeltMinder if it is currently enabled, or enable
BeltMinder if it is currently disabled.

7. Confirmation of disabling BeltMinder is provided by the safety belt

warning light flashing four times per second for three seconds.

8. Confirmation of enabling BeltMinder is provided by:

•

The safety belt warning light flashing four times per second for three
seconds.

•

Followed by three seconds with the safety belt warning light off.

•

Once again, the safety belt warning light will flash four times per
second for three seconds.

9. After receiving confirmation, the deactivation/activation procedure is

complete.

Safety belt maintenance

Inspect the safety belt systems periodically to make sure they work
properly and are not damaged.

NOTE:

If unsure about the proper procedures, bring your vehicle to an

authorized Mazda dealership for inspection. Inspect the safety belts to
make sure there are no nicks, tears or cuts, replacing if necessary. Check
all automatic locking retractors on all outboard seating positions as well
as the automatic locking mode for child safety seats on the passenger
front belt. All safety belt assemblies, including retractors, buckles, front
seat belt buckle assemblies, buckle support assemblies (slide bar-if
equipped), shoulder belt height adjusters (if equipped), shoulder belt
guide on seatback (if equipped), child safety seat tether bracket
assemblies (if equipped), LATCH child seat tether anchors and lower
anchors (if equipped), and attaching hardware, should be inspected after

2004 Mazda B Series

(mbs)

Owners Guide (post-2002-fmt)
USA English

(fus)

Seating and Safety Restraints

76

Detailed Information for 2005 Mazda B4000 Truck B Series Owners Manual

Lists of information found in 2005 Mazda B4000 Truck B Series Owners Manual - Page 76

  • 3. Buckle then unbuckle the safety belt three times, ending with the safety belt unbuckled.
  • 4. Turn on the parklamps/headlamps, turn off the parklamps/headlamps.
  • 5. Buckle then unbuckle the safety belt three times, ending with the safety belt unbuckled.
  • 6. Within seven seconds of the safety belt warning light turning off, buckle then unbuckle the safety belt.
  • 7. Confirmation of disabling BeltMinder is provided by the safety belt warning light flashing four times per second for three seconds.
  • 8. Confirmation of enabling BeltMinder is provided by: • The safety belt warning light flashing four times per second for three seconds.
  • 9. After receiving confirmation, the deactivation/activation procedure is complete.
  • After step 5 the safety belt warning light will be turned on for three seconds.
  • This will disable BeltMinder if it is currently enabled, or enable BeltMinder if it is currently disabled.
  • The safety belt warning light flashing four times per second for three seconds.
  • Followed by three seconds with the safety belt warning light off.
  • Once again, the safety belt warning light will flash four times per second for three seconds.

Related Documents for 2005 Mazda B4000 Truck B Series Owners Manual