Paint Damage Touch-up- Page 354

2007 Mazda CX-7 Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

CX-7_8X72-EA-07C_Edition1.pdf
background image

Black plate (354,1)

Insects, tar, tree sap, bird droppings,
industrial fallout, and similar deposits can
damage the finish if not removed
immediately. When prompt washing with
plain water is ineffective, use a mild soap
made for use on vehicles.

Thoroughly rinse off all soap with
lukewarm or cold water. Don't allow soap
to dry on the finish.

After washing the vehicle, dry it with a
clean chamois to prevent water spots from
forming.

WARNING

Driving with Wet Brakes:
Driving with wet brakes is dangerous.
Increased stopping distance or the
vehicle pulling to one side when
braking could result in a serious
accident. Light braking will indicate
whether the brakes have been affected.
Dry the brakes by driving very slowly
and applying the brakes lightly until
brake performance is normal.

Waxing

Your vehicle needs to be waxed when
water no longer beads on the finish.
Always wash and dry the vehicle before
waxing it. In addition to the vehicle body,
wax the metal trim to maintain its luster.

1. Use wax which contains no abrasives.

Waxes containing abrasive will remove
paint and could damage bright metal
parts.

2. Use a good grade of natural wax for

metallic, mica, and solid colors.

3. When waxing, coat evenly with the

sponge supplied or a soft cloth.

4. Wipe off the wax with a soft cloth.

NOTE

A spot remover to remove oil, tar, and
similar materials will usually also take
off the wax. Rewax these areas even if
the rest of the vehicle doesn't need it.

q

Repairing Damage to the Finish

Deep scratches or chips on the finish
should be repaired promptly. Exposed
metal quickly rusts and can lead to major
repairs.

CAUTION

If your Mazda is damaged and needs
metal parts repaired or replaced, make
sure the body shop applies anti-
corrosion materials to all parts, both
repaired and new. This will prevent
them from rusting.

q

Paint Damage Touch-up

Repair damage to the finish caused by
stone chipping, damage during parking
etc., by using Mazda touch-up paint
before rust begins to form. First, remove
the dirt and grease with a clean soft cloth.

If rust has already begun to form:

1. Remove rust completely with

sandpaper.

2. Wipe with a clean soft cloth.

3. Apply rust preventive primer to the

area.

8-54

Maintenance and Care

Appearance Care

CX-7_8X72-EA-07C_Edition1 Page354
Tuesday, February 6 2007 12:19 AM

Form No.8X72-EA-07C

Detailed Information for 2007 Mazda CX-7 Owners Manual

Lists of information found in 2007 Mazda CX-7 Owners Manual - Page 354

  • 1. Use wax which contains no abrasives.
  • 2. Use a good grade of natural wax for metallic, mica, and solid colors.
  • 3. When waxing, coat evenly with the sponge supplied or a soft cloth.
  • 4. Wipe off the wax with a soft cloth.
  • 1. Remove rust completely with sandpaper.
  • 2. Wipe with a clean soft cloth.
  • 3. Apply rust preventive primer to the area.

Related Documents for 2007 Mazda CX-7 Owners Manual