Black plate (208,1)
Signal
Warning/Indicator Lights
Page
Headlight High-Beam Indicator Light
Shift Position Indicator Light
TCS/DSC Indicator Light
TCS OFF Indicator Light
Cruise Main Indicator Light (Amber)/Cruise Set Indicator Light (Green)
BSM OFF Indicator Light
Lights-On Indicator Light
Turn Signal/Hazard Warning Indicator Lights
q
Brake System Warning Light
This warning has the following functions:
Parking brake warning
The light illuminates when the parking
brake is applied with the ignition switch
in the START or ON position. It turns off
when the parking brake is fully released.
Low brake fluid level warning
If the light stays on after the parking brake
is fully released, you may have a brake
problem.
Drive to the side of the road and park off
the right-of-way.
You may notice that the pedal is harder to
depress or that it may go closer to the
floor. In either case, it will take longer to
stop the vehicle.
1. With the engine stopped, open the
hood and check the brake fluid level
immediately, and then add fluid if
required (page 8-24).
2. After adding fluid, check the light
again.
If the warning light remains on, or if the
brakes do not operate properly, do not
drive the vehicle. Have it towed to an
Authorized Mazda Dealer.
5-46
Driving Your Mazda
Warning/Indicator Lights and Beep Sounds
CX-7_8AS7-EA-09E_Edition5 Page208
Thursday, May 6 2010 4:15 PM
Form No.8AS7-EA-09E