Replacing Exterior Light Bulbs- Page 425

2010 Mazda CX-7 Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

9. Customer Information and Reporting Safety Defects
background image

Black plate (425,1)

WARNING

Do not replace the xenon fusion bulbs
yourself:

Replacing the xenon fusion bulbs
yourself is dangerous. Because the
xenon fusion bulbs require high
voltage, you could receive an electric
shock if the bulbs are handled
incorrectly. Consult an Authorized
Mazda Dealer when the replacement
is necessary.

Never touch the glass portion of a
halogen bulb with your bare hands and
always wear eye protection when
handling or working around the bulbs:

When a halogen bulb breaks, it is
dangerous. These bulbs contain
pressurized gas. If one is broken, it
will explode and serious injuries
could be caused by the flying glass.
If the glass portion is touched with
bare hands, body oil could cause the
bulb to overheat and explode when
lit.

Always keep halogen bulbs out of the
reach of children:

Playing with a halogen bulb is
dangerous. Serious injuries could be
caused by dropping a halogen bulb
or breaking it some other way.

q

Replacing Exterior Light Bulbs

Replacing a headlight bulb

High-beam bulb

1. Make sure the ignition is switched off,

and the headlight switch is off.

2. Lift the hood.

3. Turn the socket and bulb assembly

counterclockwise and remove it.
Carefully remove the high-beam bulb
from its socket in the reflector by
gently pulling it straight backward out
of the socket.

4. Disconnect the bulb from the electrical

connector by pressing the tab on the
connector with your finger and pulling
the bulb upward.

5. Install the new bulb in the reverse order

of removal.

NOTE

l

To replace the bulb, contact an Authorized
Mazda Dealer.

l

If the halogen bulb is accidentally touched,
it should be cleaned with rubbing alcohol
before being used.

l

Use the protective cover and carton of the
replacement bulb to dispose of the old bulb
promptly out of the reach of children.

Low-beam bulb

(Xenon fusion bulb)

You cannot replace the low beam bulbs by
yourself.
The bulbs must be replaced at an
Authorized Mazda Dealer.

(Halogen bulb)

1. Make sure the headlight switch is off.

Maintenance and Care

Owner Maintenance

8-43

CX-7_8AS7-EA-09E_Edition5 Page425
Thursday, May 6 2010 4:17 PM

Form No.8AS7-EA-09E

Detailed Information for 2010 Mazda CX-7 Owners Manual

Lists of information found in 2010 Mazda CX-7 Owners Manual - Page 425

  • 1. Make sure the ignition is switched off, and the headlight switch is off.
  • 2. Lift the hood.
  • 3. Turn the socket and bulb assembly counterclockwise and remove it.
  • 4. Disconnect the bulb from the electrical connector by pressing the tab on the connector with your finger and pulling the bulb upward.
  • 5. Install the new bulb in the reverse order of removal.
  • 1. Make sure the headlight switch is off.

Related Documents for 2010 Mazda CX-7 Owners Manual