M I R R O R S / W I N D O W S
Always check the Owner’s Manual for more operating information and safety features
4. Rear interior light
5. Hands-Free Telephone/
navigation microphone*
6. Storage/sunglasses holder
7. Moonroof tilt switch*
One-touch operation:
Tilt open/close, push/pull
down switch
8. Moonroof slide switch*
One-touch operation:
Slide open/close, press
rear/front of switch
Tip: With all doors closed,
moonroof and front windows
can be opened via Keyless
entry by pressing and holding
unlock button, or opened/
closed by turning and holding
driver’s door key toward
front/rear of vehicle
9. Cargo light
DOOR = Light on with any
door or liftgate open
OFF = Light always off
Mirrors/
Windows
Interior
Lights
1. Map/reading light switch
Press on/off
2. Interior light switch
DOOR = light on when door open
ON = light always on
OFF = light always off
Tip: All interior lights can
be turned ON/OFF using
driver’s overhead switch
when all light switches
are in DOOR position
3. Front interior light
Power window switches
With ignition ON
All windows controlled from
driver’s armrest; passenger doors
have separate switches
Front window switches
One-touch down/up: Press/pull
AUTO switch (
3
) firmly and
release, window goes down/up
all the way, press/pull briefly
to stop, press/pull lightly and
hold for normal operation,
momentarily press front power
window switches, front windows
will open to vent position
Tip: During closing front window
operation, front window will
stop and open partway if object
blocks window operation
Power window lockout switch
Press button (
5
), only driver's
window operates; press again
for normal operation
Rear window control switches
Push/pull (
4
) to open/close
Power window
initialization procedure
If battery is disconnected or power
window fuse is replaced, the auto
open/close and anti-pinch features
will not function until initialization
is complete
Initialization procedure:
1. Turn ignition switch to “ON”
position
2. Press front passenger power
window switch down to fully open
window, then pull switch up to
close window completely, continue
holding switch up for at least
3 seconds, then release switch
3. Move to driver’s door and repeat
Step 2 for driver’s window
4. After windows have been
initialized turn ignition to
“LOCK”, then back to“ON”
Dual power mirrors
Ignition switch must be in ACC
or ON position
To adjust left/right mirror: Press
selector (
1
) left/right, press (
2
) in
direction of desired movement
Tip: To lock mirrors in place,
move switch (
1
) to center position
AUTO
AUTO
5
R
L
4
3
2
1
OFF
ON
1
5
2 6 1
8 7
3
3
OFF
ON
DOOR
4
2
OFF
DOOR
9
*Denotes optional equipment