Black plate (138,1)
NOTE
If the battery goes dead while the theft-
deterrent system is armed, the horn will
activate and the hazard warning lights will
flash when the battery is charged or replaced.
q
How to Arm the System
1. Remove the key from the ignition
switch.
(With advanced key)
Turn the start knob to the LOCK
position.
2. Make sure the hood is closed. Close
and lock all doors and the liftgate from
the outside using the key. If you have
the keyless entry system, press the lock
button on the transmitter.
(With advanced key)
Press a request switch or the lock
button on the transmitter.
(Without advanced key)
The following method will also arm the
theft-deterrent system:
Close the hood and the liftgate . Press
the area on the door-lock switch
marked
“ ”
once. Close all doors.
The hazard warning lights will flash
once to indicate that the system is
armed.
The theft deterrent system can also be
armed by activating the auto re-lock
function with all the doors, the liftgate and
the hood closed.
NOTE
Auto re-lock function
After unlocking with the transmitter or the
request switch, all doors and the liftgate will
automatically lock and the hazard warning
lights will flash if any of the following
operations are not performed within about 30
seconds.
l
A door or the liftgate is opened.
l
The auxiliary key inserted into the ignition
switch (with advanced key).
l
The start knob is pushed (with advanced
key).
q
To Turn off an Armed System
An armed system can be turned off by any
one of the following methods:
l
Unlock a door with the key.
l
Press the unlock button on the keyless
entry system transmitter.
l
Insert the key into the ignition switch
and turn it to the ON position.
l
(With advanced key)
l
Press a request switch or the unlock
button on the transmitter.
l
Turn the start knob to the ON
position.
The hazard warning lights will flash twice
to indicate that the system is turned off.
q
To Stop an Alarm
A triggered alarm can be turned off by
any one of the following methods:
l
Unlock a door or the liftgate with the
key.
l
Press the unlock button on the keyless
entry system transmitter.
l
(With advanced key)
l
Press a request switch.
l
Press the unlock button on the
transmitter.
3-56
Knowing Your Mazda
Security System
CX-9_8Z66-EA-08F_Edition1 Page138
Thursday, May 29 2008 10:7 AM
Form No.8Z66-EA-08F