Set Up; Bluetooth audio device programming- Page 94

94

Bef

ore 

Use

Getting

star

ted

Routing

Ad

dress 

Book

Vo
ic

e

Recogn

ition

Na
vigation 

Set Up

RDM-TMC

A

u

dio Operation

N

a

vigation 

Set Up

Yes: Available
No: Not available

Bluetooth is the registered trademark of Bluetooth SIG. Inc.

Note

l

It may not be possible to play a Bluetooth audio device if it is placed anywhere transmission 
is compromised, such as inside a metal container or the trunk. Move the Bluetooth audio 
device to a location where transmission is possible.

l

Battery consumption of Bluetooth audio devices is higher while Bluetooth-connected.

l

If a non-Bluetooth device is to be used, a commercially-available Bluetooth adapter is 
required. When playing an audio device with a Bluetooth adapter installed, programming of 
the audio device may not be possible or audio may not be heard from the vehicle speakers 
if the connection of the adapter and the device is poor. If this happens, check if the 
Bluetooth adapter is properly connected.

n

Bluetooth audio device programming

Any Bluetooth audio device must be programmed to the vehicle’s Bluetooth unit before it can 
be listened to over the vehicle’s speakers.
A maximum of seven devices including Bluetooth audio devices and hands-free mobile 
phones can be programmed to one vehicle.

Note

l

Always perform Bluetooth audio device programming while the vehicle is stopped.

l

If a Bluetooth device has already been programmed to the vehicle as a hands-free mobile 
phone, it does not need to be programmed again when using the device as a Bluetooth 
audio device. Conversely, it does not need to be programmed again as a hands-free mobile 
phone if it has already been programmed as a Bluetooth audio device.

l

The transmission range of a Bluetooth audio device is about 10 m (32 ft).

l

Therefore, if there is another Bluetooth audio device within a 10 m (32 ft) radius of the 
vehicle, the device may be identified and programmed instead.

Concerning the operation of a Bluetooth audio device itself, refer to its instruction manual.
Some Bluetooth audio devices have PIN codes (four digits). Refer to the audio device’s 
instruction manual because the programming procedure differs depending on whether it has 
a PIN code or not.

Function

A2DP

A2DP+AVRCP

Playback

No

Yes

Pause

No

Yes

File(Track)
up/down

No

Yes

2%:':9)FSSO4EKI1SRHE].YRI41