When Driving; AUTOHOLD System is Turned Off- Page 192

NOTE



If the Electric Parking Brake (EPB)
switch is pulled while the AUTOHOLD
is operating, the parking brake is
applied and the AUTOHOLD is
released. In addition, if the parking
brake is released under this condition,
the AUTOHOLD operates to hold the
brakes.



Under the following conditions, the
parking brake is automatically applied
and the AUTOHOLD is released. The
AUTOHOLD is re-enabled when the
conditions before the AUTOHOLD is
released are restored.



The driver’s seat belt is unfastened.



The driver’s door is opened.



When about 10 minutes or longer have
passed since the AUTOHOLD operation
started, the parking brake is
automatically applied. Because the
AUTOHOLD is restored when releasing
the parking brake, the hold on the
brakes by AUTOHOLD function
resumes.



(Manual transaxle vehicle)

When starting to drive the vehicle
forward or in reverse on a down slope,
depress the clutch pedal and shift the
shift lever to the appropriate position for
driving in the desired direction, and then
depress the accelerator pedal to release
the AUTOHOLD.

▼

AUTOHOLD System is Turned Off

Depress the brake pedal and press the
AUTOHOLD switch. The AUTOHOLD is

turned off and the AUTOHOLD standby
indicator light turns off.

AUTOHOLD standby 
indicator light

NOTE



When the brakes are not held such as
while driving the vehicle, the
AUTOHOLD can be turned off only by
pressing the AUTOHOLD switch.



If the AUTOHOLD switch is pressed
without depressing the brake pedal
while the AUTOHOLD is operating
(AUTOHOLD active indicator light is
turned on), the brake pedal operation
demand indicator light (green) in the
instrument cluster turns on to notify the
driver that it is necessary to depress the
brake pedal.

(Green)

When Driving

Brake

4-62

CX-3_8JL1-EA-20G_Edition1_old

2020-5-22 15:31:00