Factory Set; Available Settings; Active Driving Display- Page 607

Item

Feature

Factory Set

‐

ting

Available Settings

Settings

Change
Method

Fuel economy resetting
procedure

Linkage/non-linkage with fuel
economy reset and trip meter
reset

Off

On/Off

B

―

Active Driving Display

 (page 4-18)

Display

Setting can be changed so that
the Active Driving Display is
not displayed.

On

On/Off

C

―

The display height (up/down
position) can be changed.

0

13 steps up/down

from initial setting

(total: 27 steps)

C

―

The method for adjusting the
display brightness (automatical

‐

ly/manually) can be changed.

Auto

Auto/Man.

C

―

The standard brightness while
automatic adjustment is select

‐

ed can be changed using the
brightness adjustment.

0

2 steps up/down from
initial setting (total: 5

steps)

C

―

The standard brightness while
manual adjustment is selected
can be changed using the
brightness adjustment.

0

20 steps up/down

from initial setting

(total: 41 steps)

C

―

Navigation guidance

Display/non-display

On

On/Off

C

―

*

1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda

recommends that these systems remain On.

*

2 For vehicles with an audio system other than the on-screen function type, the warning sound cannot be

changed. The warning sound is only a beep.

*

3 Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The

volume of the warning beep during Rear Cross Traffic Alert (RCTA) operation cannot be changed.

*

4 This system functions only when the navigation system is functioning.

*

5 If the auto-wiper control is set to Off, the wiper lever 

 position is set to intermittent operation.

*

6 If the setting is changed to Off, the following operation is performed according to the headlight switch

position:



At 

 position: Headlights turn off immediately after the ignition is switched off.



At any position other than 

: Headlights do not turn off after the ignition is switched off.

*

7 When set to Off, the lights-on reminder is operable.

*

8 The setting of the lights-on reminder can be changed with the time setting of auto headlight off function set to

Off.
Refer to Lights-On Reminder on page 7-42.

*

9 The operation may stop in 15 minutes due to the effect of the outside temperature even if the operation time of

the rear window defogger has been changed to Continuous.

*

10 Available only in display from the center display.

Specifications

Personalization Features

9-13

CX-3_8JL1-EA-20G_Edition1_old

2020-5-22 15:31:00