Driving Position Memory; Essential Safety Equipment; Programming using a button on- Page 25

Refer to Height Adjustment on page 2-20.

▼

Driving Position Memory

*

The desired driving position can be called
up after programming the position.
The following driving positions can be
programmed.



Driver’s seat position (seat slide, height
adjustment, front edge of seat bottom,
seat recline)
Refer to Adjusting the Driver's Seat on
page 2-5.



Active driving display (display position,
brightness level, display information)
Refer to Active Driving Display on page
4-56.

CAUTION

Do not place fingers or hands around the
bottom of the seat while the seat memory
function is operating. The seat moves
automatically while the seat memory
function is operating and fingers or hands
could get pinched and injured.

SET button

1

2

A driving position can be programmed or
operated using the buttons on the side of
the seat or the key.

NOTE



Lumbar support adjustment cannot be
programmed.



A driving position can be programmed
to the buttons on the side of the seat and
the key in use for driving the vehicle.



If the vehicle has been serviced and the
battery cables disconnected, the
programmed seat positions will have
been erased. Re-program the seat
positions.

Programming

1. Make sure the parking brake is on.
2. Make sure the selector lever is in the P

position.

3. Start the engine.
4. Adjust the seat and the active driving

display to the desired driving position.

5. Press the SET button on the seat until a

beep sound is heard 1 time.

6. Perform one of the following settings

within 5 seconds of completing step 5
above:



Programming using a button on
the side of the seat

Press the button you want to
program, either button 1 or 2, until a
beep sound is heard 1 time.



Programming using the key

Press the key   button until a beep
sound is heard 1 time.

NOTE

If a beep sound is heard 3 times, the
operation is canceled.

Essential Safety Equipment

Seats

*Some models.

2-11

CX-5_8HE3-EA-18I_Edition1

2018-6-29 13:44:47