Lumbar Switch; Recline Switch; Memory Seat Switch- Page 3

3

4

To Program the Driver’s Seat Position and Outside Mirror Angle

1

  Park the vehicle.

2

   Adjust the seat to the desired position using the slide/tilt and  

recline switches.

3

   Adjust the outside mirror angles.

4

   Push the memory seat 

SET

 button followed by one of the programming 

buttons (1-3) until a beep is heard. Programming is now complete. 
Program the remaining two buttons as desired.

To Program the Driver’s Seat Position and Outside Mirror Angle 
with Advanced key/Retractable type key

1

  Adjust the seat and outside mirror angle to the desired positions.

2

  Switch the ignition off.

3

   Push  the 

SET

 button next to the programming buttons and then the 

unlock button on the advanced key/retractable type key you want to 
program within about 5 seconds. A beep sound is heard when the 
operation is completed.

NOTE: 

When the driver's door is unlocked using a programmed advanced key/ 

retractable type key, the seat and outside mirror angles will move to their programmed 
positions if the driver's door is opened within about 40 seconds. A beep sound is  
heard after the adjustment to the programmed positions is completed.

To Move the Seat and Outside Mirrors to a Programmed Position

1

  Shift the selector lever to the P position.

2

   Push the programming button (1-3) that you selected when 

programming your seat position.

Seats

ELECTRONICALLY OPERATED SEAT WITH MEMORY 

Slide/Tilt Switch

Seat can be moved back 
and forth, raised, lowered,  
or tilted with this control.

Lumbar Switch

Push forward or backward to increase or 
decrease lumbar support.

Recline Switch

Push forward or backward 
to adjust seatback angle.

Memory Seat Switch

1

  Open liftgate.

2

   Lower head restraints.

3

   Pull each strap on the rear of  

the seat while pushing the left  

and right seat forward to lay flat.

To Return to the Original Position

 Pull the strap to return the seatback to the original position.

SPLIT FOLDING THIRD-ROW SEAT

To create a flat luggage compartment  

space, fold the seatbacks forward.

Third-row seat 

access lever 

Seatback folding 

lever

Straps

NOTE: 

The third row seats are equipped with foldable head 

restraints. To fold the head restraint, pull the strap on the back 
of the head restraint and fold the head restraint downward. To 
return the head restraint to its upright position, lift it upward.

Strap

SECOND ROW SEATBACK RECLINE

To recline the seatback, lean forward slightly while folding lever.  

Then lean back to the desired position and release the lever.

FOLDING THE SECOND-ROW SEATS

1

  Unfasten the lap portion of the center-rear seat belt. 

2

  Slide seat all the way back toward rear of vehicle. 

3

  Lower head restraints. 

4

  Pull the seatback folding lever and fold the seatback forward.

THIRD-ROW SEAT ACCESS

  •   Pull the third-row seat access lever on the  

side of the second-row seatback to fold  

and slide the seat forward to access  

third-row seating. 

  •   Return the second-row seatback to the  

normal upright position by pulling up on  

the seatback until it locks into place. 

  •   Slide the second-row seat forward or back  

for proper legroom using the lever under  

the front of the seat.

www.MazdaUSA.com